Ducati.ms - The Ultimate Ducati Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 29 Results
  1. Superbikes
    Hello everyone, I’ve been reading through these forums for a little over a week and although extremely knowledgeable and helpful I found myself a bit stumped. I bought a used 2003 Ducati 999 from the previous owner who said he couldn’t get it running and had replaced the wire loom, starter...
  2. Superbikes
    I'm building a track bike from my Ducati 999 (2003). I would be happy to receive some advice if you have experience with a similar project. Parts I have currently updated: -Ohlins steering damper. -Fairings. Next i adjust the suspension... What else should be taken into account? Tires are...
  3. Superbikes
    Anybody have a 2001 Ducati 996 superbike service/workshop manual PDF download or anything.‽‽‽‽‽‽ Iam in desperate need of this manual. Please and much thanks!!! 🙏🙏 -----DiAMOND69
  4. Superbikes
    I’m sure I’m going to get flamed for this but it’s time to transform this ol bag of scraped up fairings and steel into something respectable again. I’ve been on the fence about going down this road for a while but figured it’s better than the alternative of not having a 998. I had plans of...
  5. Superbikes
    I got this bike from a friend of mine for a very good price and its my new project bike since I've finished everything with my 999 (for now). Obviously there are some issues but I think if i can get her running right it will be a good one. Only 5200 miles on the clock! This bike also came with...
  6. Superbikes
    Looking for some help on a current clutch issue with 2019 V4R. A little insight as to what happened and where the issue began. Bike has been riding fine with no issues, it was assumed there could be some air in the clutch line as occasionally it would lose some pressure when the bike is warmer...
  7. Superbikes
    Ive recently come across a issue on my 2013 848 after doing some winter maintenance. To give a proper explanation I've only ridden the bike twice in the past 3 months due to being busy(Ducati Maintenance schedules and Work). So about a month and a half ago was the last ride for me besides...
  8. Australia, New Zealand, and AsiaPac
    Hi everyone, just reaching out at i have plans to do an engine swap into a999 chassis, and am interested to see if anyone can recommend a approved engineer that won't drain your cash, or is easy to deal with. Asking for both MAY be a stretch... Thanks in advance! Darius
  9. 2015 Yamaha R1M

    Here is my 2015 Yamaha R1M. Mods include an AR Racing GP Full Titanium Exhaust, Tail Tidy, Blaster-X LED light, and Zero Gravity windscreen. Stock ECU. Cold start Video: Test Ride:
  10. Superbikes
    Long story short I was in the process of replacing the foot peg on my crg rearsets and now the brake light stays on , seems as if something is loose, not adjusted right , anybody know how I can fix this issue ? Video showing the issue
  11. Superbikes
    According to my local bike place the 2 exhaust valves are bent having used a camera down the plug hole , 20000 miles plus done . Full cam belt change and shims done in October. Does Anyone have any suggestions how to fix this economically? . Also the original dealers that did my desmo service...
  12. StreetFighter
    I have a streetfigher 1098 that will idle prefect when warming up, but as soon as you go above 4000 RPMs the idling gets stuck there. The bike will rev higher but will just get stuck and won't go any lower than 4000 RPMs. the only way to get it back down , is to turn off the bike and turn it...
  13. Superbikes
    Hello, I've recently been experiencing problems where my SF 1098 will stick at 4000 RPMs once I exceed that RPM speed when accelerating. It will also stick at that speed when idling, but will idle at 1300 RPMs when the bike restarts. I was able to pin point the problem by myself to a part...
1-14 of 29 Results
Top