Ducati.ms - The Ultimate Ducati Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 65 Results
  1. Tech Forum
    Does a 999 front wheel fit a 1098 Showa fork? And vice versa (1098/Hyper front wheel in a 999 Showa fork)? I have no problem to mix and match spacers or brake discs; it's for a track bike.
  2. Superbikes
    Hello guys and thanks for all for all the info so far! Im down to the rabbit hole with my Ducati. 😂 I was going to just learn to change belts but ended up checking everything. So my question is about timing the cams. Specially measuring it down from valve shims the lift. Eighter im measuring it...
  3. StreetFighter
    Well much to my wife's amusement I am asking for assistance. I have a 2010 Streetfighter 1098. It ran last year and then sat in the garage. I couldn't get it to start. After much searching and resourcing the Desmo Times manual I went on a hunt. I realized the fuel pump was disconnected...
  4. Superbikes
    Hi, Wondering if anyone has tried combining the SC Project CR-T end cans with Termingnoni headers on an 1098 or similar? Both have a 70mm diameter, so wondering if they are compatible. Thanks in advance, Greg
  5. Superbikes
    Merry Xmas All, Fixing my starter gear for the 2nd time, bent shaft and broken teeth everywhere. My mechanic advises upgrading to the 1198 alternator cover with the supporting boss so that the starter idler shaft is supported at both ends (ala 1198) rather than 1 end (ala 1098). However, for my...
  6. Superbikes
    My 1098 wont start after warming up. The bike starts up fine when cold. but after warming up a little, it wont start again and would act like as if the battery discharged. I first thought that the issue is with the battery so i bought a higher amp battery. But the problem persisted then I...
  7. Superbikes
    Hi all, i recently purchased (bad decision in hindsight) a tuneboy diy kit for a 1098 with the cable. I went through the flashing sequence but not once in the steps were my goals realised. Im building a 1098 trackbike from bits, what us aussies would call a "bitsa" bike, engine from here, loom...
  8. Superbikes
    Hi, any idea about torque settings for these guys? I heard 19 / 25Nm in two steps for the mains (M8) 20Nm for the hollowed one 9Nm for the rest. Looks good to you? Cheers,
  9. Superbikes
    Hello there, Currently going through the "standard" rod bearing failure one must experience (at least once in a lifetime) with this bike... 17000km and some sexy copper chips in the pan...so had to strip the girl 😋. Since the book i have (aka 2007 draft copy v.0) has some flaws, i hoped some...
  10. Superbikes
    Hi All, Has anyone tried the Aliant YLP07 battery on the 1098s? Link here If not, what would you guys recommend as a DECENT replacement for this model? YLP07 specs are: Voltage: 13.2v PbEq capacity: 7Ah Cranking amps: 260A Cold cranking amps: 130A Max charge current: 5A Weight: 450g (.99lb)...
  11. Superbikes
    I am in the process of fitting the full Termi system to my Tricolore. (In Europe it was only delivered with the slip ons, filter and DP ECU) My question: When I remove the O2 sensor and servo motor together with the stock system, will the DP ECU be good enough regarding AFR or do I need a...
  12. Superbikes
    Hi, Time for belt change on my bikes. Im thinking of building my own set of cam lock tools, like the oem version. Does anybody know the exact angle of the T slots at the end of the cams when horisontal cylinder in tdc.? Both for 999s - 06 and 1098 - 07.
  13. Superbikes
    Who has installed a Toce exhaust on their 1098? I’m wanting to try something different for exhaust. Currently have Termis installed. Maybe SC project could be an option
  14. Superbikes
    Hi, i do have an SF 848 but i prefer to post here considering it's an engine related thing. In the last weeks especially the last 2, i noticed that the bike wants to power off when coming to a stop and i pull the clutch in, and it keeps getting worse. Idle is a bit low too (until like 1 month...
  15. Tech Forum
    Rode my Streetfighter out of my driveway and wiped out on cold tires at walking speed. Still not sure how because it happened so fast. Anyways, bike was circling on its side but damage was limited to the bar end mirror, brake lever and frame/fork/clutchsliders. I got right back on and went for a...
  16. Superbikes
    Hi All, I’ve mostly ridden my SF on country roads on weekends over the years but recently purchased an 848 evo as a dedicated track bike as I’m excited to hone my skills in a safer environment. As a track noob, I’ d love to hear any recommendations from 848/1X98 owners for any gear, tools or...
  17. Ducati Motorcycle Chat
    If anyone needs help pulling your codes from your dash or to ride with an aftermarket ignition on a Ducati 1098/1199/848 let me know. I’ve successfully done it on a bike that hasnt ran in 14 years with no keys. willing to help/post a guide depending on how many people need it.
1-17 of 65 Results
Top