Ducati.ms - The Ultimate Ducati Forum banner

Search results

1-20 of 83 Results
Advanced Search
  1. 04 multistrada 1000ds fuel issue?

    Ducati Motorcycle Chat
    There is an issue with the wires that go into the fuel pump, the wires work loose and you have intermittent pressure. You can take the pump out and dig out all the epoxy around the wires. Then solder the wires back in. Or buy a new pump $$$$
  2. Hypermotard 950 Clutch Issues/Hight Engagement Point

    HyperMotard
    There is a definite problem with the slave cylinders. Replacements are no better. Ducati will eventually find a fix. In the mean time keep bleeding! Just crack the bleeder and slowly squeeze until it just starts to push fluid.
  3. Marzocchi; what I learned

    HyperMotard
    Yeah, so the Andreani are a little different. The fork extends further than stock and the bottom travel is a 20mm less. Hmm.......
  4. Marzocchi; what I learned

    HyperMotard
    Extended length? OK I have a question about the Marzocchi forks. Since installing the Andreani and setting the sag, I've noticed that I have a lot more trouble reaching the ground and it looks like the travel doesn't reach as far down the fork as before. Can someone give me a measurement of the...
  5. Does the HM start while in gear?

    HyperMotard
    I don't know if the 1100 is the same. If there's wires going to the lever it might be. Sent from my Nexus 5X using Tapatalk
  6. 2013 - 15 SP fork upgrade

    HyperMotard
    So I finally threw in the towel and broke down for some Andreani cartridges. A worthwhile upgrade. I like to say, the best thing you can say about suspension is that it doesn't call attention to itself. That sure wasn't the case with the Marzocchi's. So after 7 days of this I'd say the only...
  7. Marzocchi; what I learned

    HyperMotard
    Marzocchi's are schizophrenic. I think a lot depends where in the stroke you are. Andreani just do the job. They are not sealed/bladdered so we'll see if cavitation becomes an issue. I rode a 2018 with the Ohlins today...........yeah, it's the way to go. Love the 939 motor.......... so smooth...
  8. Dainese Alien Men's Leather Pants 56 Euro - $200

    Gear
    Is this still available? Dainese sizing can be little sketchy, if the're still for sale, what size are you? thanks
  9. Brembo M4 Brakes

    Parts and Accessories
    Sold
  10. WTB 2013-2015 plate holder Hypermotard

    Parts and Accessories
    Never mind!
  11. Looking for a 2013-2015 plate holder

    HyperMotard
    I'm looking for a 2013-2015 plate holder since mine exploded after my mid corner gravel off
  12. WTB 2013-2015 plate holder Hypermotard

    Parts and Accessories
    Stock or aftermarket
  13. Brembo M4 Brakes

    Parts and Accessories
    Price Drop! $400.00 Price Drop! $400.00
  14. Marzocchi; what I learned

    HyperMotard
    Oooooooh, now you're gettin' fancy! Ummm, I went crazy trying to take the top cap off but in trying it's the bottom that came loose. The hard part is how to hold the cartridge while unscrewing the bottom. It uses normal threads. Here's how I held the thing. I thought about heating too but went...
  15. Marzocchi; what I learned

    HyperMotard
    I looked everywhere for info on this to no avail. Yeah, that plug was key! Funny thing was the way I found it was by disassembling the cartridge first! I have some shiny wear on the stanchions, not to bad for 32K. From what I gather the SAE wt. spec is not to reliable. I used Ohlins fork oil...
  16. Marzocchi; what I learned

    HyperMotard
    My SP Blew a fork seal. Get seal...not from Ducati A 50mm seal installer. Some people use home made pvc ones. Hey, the driver is cheap compared to redoing the job! This is a nice touch or something similar. Loosen the fork caps after loosening the top triple clamp. Remove legs You'll need to...
  17. Brake line: Keep an eye on this.

    HyperMotard
    If your (821) bike has fallen over our been dropped, be aware the steering stop can bend and allow the brake line to become the steering stop. The line will then be crushed. Seen it twice so far. brk lines by fredgilb2003, on Flickr
  18. Brembo M4 Brakes

    Parts and Accessories
    OK, Thank you that clarification. Sent from my Nexus 5X using Tapatalk
  19. Brembo M4 Brakes

    Parts and Accessories
    This came off a 2013 Streetfighter. I was going to put them on a Hypermotard but I changed my mind. So, for $500.00 +20 shipping they could be yours! They are the M4 calipers. I think they are also referred as M50. untitled-1 by fredgilb2003, on Flickr untitled-3 by fredgilb2003, on Flickr...
  20. Hyper 821 clutch sucks, does your's?

    HyperMotard
    I'm still am amazed at how much better it is. Sent from my Nexus 5X using Tapatalk
1-20 of 83 Results
Top