Ducati.ms - The Ultimate Ducati Forum banner

Search results

1-20 of 91 Results
Advanced Search
  1. Need directions for 04 999 Showa forks rebuild + other items

    Superbikes
    Might pay to check the fuel filter and fuel lines inside the tank. I didn't on an ST4 that had been laid up for a while and got to hitchhike home....It also came up on this forum that the 999 can be prone to rust in the tank.....
  2. 999 running on back cylinder only.

    Superbikes
    That WOULD be interesting.....
  3. 999 running on back cylinder only.

    Superbikes
    Thanks for your thoughts - appreciated Spark is OK, front cylinder plug was white lean and dry. Not proven to be limited to hot or cold at the time. (Is now but..cold and still faulty). Trying to pick the "low hanging fruit" (love that one!) first but as an electrician/technician I've learn't...
  4. 999 running on back cylinder only.

    Superbikes
    I'll do that. Thanks. Trying to get my head around all the software again, It was TuneECU on the turbo KTM, TunerPro I used when I extracted the .bin files from the eproms in the 16m's. My 999. Workshop Manual says it is a 5AM, every other reference I can find says it is a 59M. Was there a...
  5. Best software for a 999?

    Superbikes
    I've just downloaded a new version, but which Guzzi do I pick to give me the right ecu for the 999 (12/2002)?
  6. 999 running on back cylinder only.

    Superbikes
    Started cold ok, backfired once on a warm start. Did about 10klm this morning and it starts running on the back cylinder. Put new plugs in, ran for about a minute on both, then back to 1. The old back plug was almost rich, but the front plug was lean as white. Spark is ok, starts and runs fine...
  7. Best software for a 999?

    Superbikes
    What is the best, including easy to use, software for my 999? And where is the best download site? I've used tunerpro, iaw, and guzzidiag on KTM and Laverda, and I now have o get access into the 999. Need to display and reset fault codes, test componants (injectors, coils ect), copy the map to...
  8. 1999 ST2 Charging Problem

    Sport Touring
    I've used the Ignitec single phase regulator on my Zane Laverdas. Basically the same system as the Ducati's of the era? And they are very very well priced.
  9. 916 Manifold Gauze

    Superbikes
    I have recurring nightmares about the airducts, filters and other debri being sucked into the motor, and I have seen a few motors where this has happened. So I went to my local plumbing supplies and bought a couple of 90mm overflow vents for a rain water tank and then modified and fitted them as...
  10. Reference Material on Weber/Magnetti Marelli

    Tech Forum
    That's about what I'm starting to think.....must be something somewhere....
  11. WTB 2002 ST4 bits and pieces - Aus.

    Parts and Accessories
    Bump?
  12. Reference Material on Weber/Magnetti Marelli

    Tech Forum
    Punch. Unfortunately one can't stop progress whether we see it as good or bad. We just have to run with it. The bush acreage at the end of our street from 15 years ago is now houses. The Koalas, roos, kookaburras ect don't have it any more. I guess the positive side is we now have some of them...
  13. Reference Material on Weber/Magnetti Marelli

    Tech Forum
    Does anyone know where I can get detailed reference material on the Weber/Magnetti Marelli ECU's? Something that covers ECU's used on Ducati, Laverda, Guzzi ect in detail, including block diagrams, schematics, programming ect. I would appreciate references websites, books, research papers...
  14. WTB 916/ST2 ECU. 749/999/ST3 ECU plugs

    Parts and Accessories
    Really nice offer. Appreciated. Looking at pictures on ebay for the hypermotards, there appears to be 2 ecu's. A single plug Continental, and a twin plug Marelli. The twin plug Marelli sockets look the same as the 59M I have, so does the harness have 2 of 38 pin plugs. Next. Is the harness...
  15. WTB 916/ST2 ECU. 749/999/ST3 ECU plugs

    Parts and Accessories
    Finally got home, fixed bugs in wifi network used while travelling, and caught up with jobs. Thanks both for the responses. breakpoints and granularity put a name to concepts I understood. I have a basic understanding, having done Industrial Electronics (eg digital and pulse techniques) some...
  16. WTB 2002 ST4 bits and pieces - Aus.

    Parts and Accessories
    I am looking for a set of Givi or Ventura brackets (not the actual rack, unless one is included). I need these asap, and will consider paying freight from US / Europe. I aslo need:- Fuel guage sender right front indicator lense, (or was it left...), or complete indicators right rear indicator...
  17. WTB 916/ST2 ECU. 749/999/ST3 ECU plugs

    Parts and Accessories
    I speak from a point of ignorance at the start of a learning curve (hopefully linear) and your advice is appreciated. Breakpoints and Granularity? I need a book on the subject..... Umina Beach? We were going to camp at Brooklyn about Oct 7. Any good RV spots at Umina Beach? Regards, Greg
  18. WTB 916/ST2 ECU. 749/999/ST3 ECU plugs

    Parts and Accessories
    WANTED: Stuffed Weber Marelli 16M ECU,(916, ST2, that era) need the case only. (or a very cheap good unit...), AND/OR from a 749/999, ST3 era, plugs and tails, or damaged rear harness. to fit the Magnetti Marelli 59M ECU. Purpose. to fit a 59M inside the 16M so I can tune the Laverda 668 &...
  19. Fuel tank disconnects

    Superbikes
    OK. Thanks. I could have pulled the tank off the 999, but is easier to ask. Does anyone have any part numbers for Quickcouplings for the 999?
  20. Fuel tank disconnects

    Superbikes
    Are the disconnects on a 916 the same as the 999? I need some for the 916, so thought I might grab a set for the 999 at the same time. Looking at Coyote-Gear or Quickcouplings. Also, the air duct tops on the 916 are cracked, so I am looking for carbon fibre replacements. What I can't find are...
1-20 of 91 Results
Top