|Topic Review (Newest First)|
|Jul 14th, 2019 6:11 am|
Originally Posted by Pard View Post
|Jul 12th, 2019 8:04 am|
|MK212MX||Late, but congrats!!|
|Jul 2nd, 2019 6:19 pm|
I got sidetracked on a massive home improvement project (landscaping the whole property). That and the fact that it has rained every 3 days and wreaked havoc with construction schedules all over Texas have kept me from riding for a couple weeks.
This bike has made me ride more aggressively. I saw your thread on the Dunlop Q3. I'm kinkd of torn on weather I will go with a different tire when my P Corsas wear out. I'm at only 890 miles and they still look good and these things stick like nothing I have ever ridden on the street before.
I'm starting to think I don't need better mirrrors. Lately, I've been passing every one.
|Jun 27th, 2019 12:24 pm|
Originally Posted by TexasJeff View Post
Did you find mirrors you are happy with?
I am not using my FAR viper mirrors. Would you like to try them out and if you like them I am sure we can work out a price that you are happy with. I can mail them out to you if you want. Shoot me a PM.
I prefer the setup pictured using CRG style mirrors on the hand guards over the vipers.
|Jun 4th, 2019 6:39 pm|
|gus duc||Those sound and look great and no popping on decel with the stock map is impressive. One note to those that do install...always wear gloves & when you are done wipe down all the metal pipes with isopropyl alcohol before you start the bike and heat them up as any residue or finger prints will be burned into your new pipes.|
|Jun 4th, 2019 5:56 pm|
Originally Posted by gamingthemarket View Post
It's somewhat of a pain to remove but not too bad if you know what you're doing. There is a small weld you have to grind off. The left side came out a little easier but the right side was a pain in my butt! That thing was in there. To make things worse I dropped a tool down my exhaust while getting creative trying to remove it so ended up taking the lower exhaust apart which really sucked.
Upon reinstall I left the exhaust servo cable disconnected for that butterfly valve. Bike ran great without it. I eventually got the right side db killer out (not gonna lie, I had to get pretty creative but it worked after a couple hours of trying different ideas).
|Jun 4th, 2019 5:31 pm|
Here's what they sound like, which includes a fly-by:
|Jun 4th, 2019 10:25 am|
Originally Posted by TimF View Post
Only the grips. I only had to slide the grips over maybe an 1/8”-1/4” since there was already a little gap, didn’t have to move the levers at all.
|Jun 4th, 2019 10:05 am|
Originally Posted by firstascent View Post
|Jun 4th, 2019 6:25 am|
I removed the signals from the ital-shop tail tidy and used some audi style cheap led strips..
Replaced mirror by small bar mirrors.
sadle strap under the sadle..
|This thread has more than 10 replies. Click here to review the whole thread.|