Equivalent Parts for ST Bikes - Page 2 - Ducati.ms - The Ultimate Ducati Forum
Reply
 
LinkBack Thread Tools Display Modes
post #11 of 101 (permalink) Old Aug 30th, 2011, 9:40 pm
Senior Member
 
Desmo_Demon's Avatar
 
Join Date: Oct 2004
Location: Easley, South Carolina, USA
Posts: 3,442
Quote:
Originally Posted by tonered View Post
Go to the Yuasa website and download their battery specs. You can then compare those to what is available locally. The rare aspect for the ST is the width. I recently installed a 12Ah YT14B-4 or something like that.
Anyone with the longer battery as used in the '97-'00 ST2 and ST4 bikes that wants a better battery selection with AGM or gel batteries can update their bike with the smaller battery used on many other Ducatis as stated in this post in the battery sticky...


https://www.ducati.ms/forums/40-sport...ml#post1133688

Can't get a new sig pic to load. Oh goodie.
Desmo_Demon is offline  
Sponsored Links
Advertisement
 
post #12 of 101 (permalink) Old Sep 13th, 2011, 11:18 pm
Prolific Poster Award
 
cb4265's Avatar
 
Join Date: Dec 2008
Location: Tamworth, NSW, AUSTRALIA
Posts: 6,906
Garage
Quote:
Originally Posted by cb4265 View Post
Rear wheel bearing part number is 6005 2RS C3V2

I think the front wheel bearings are the same.

Why don't we have a sticky or similar for workshop, parts book & owners manuals available as well?

Craig
Just got quoted $49.00 each bearing by Ducati dealer, picked them up for $6.70 each at a local bearing supplier.

It pays to shop around.

Craig

Ducati 998S FE 2004
Ducati ST4S 2003
Cagiva Mito 125 1993 Bucket racer
cb4265 is offline  
post #13 of 101 (permalink) Old Sep 14th, 2011, 5:56 pm
Mr Leakered
 
tonered's Avatar
 
Join Date: Jul 2008
Location: Lynnwood, WA, USA
Posts: 8,749
Garage
Images: 25
Quote:
Originally Posted by Desmo_Demon View Post
Anyone with the longer battery as used in the '97-'00 ST2 and ST4 bikes that wants a better battery selection with AGM or gel batteries can update their bike with the smaller battery used on many other Ducatis as stated in this post in the battery sticky...


https://www.ducati.ms/forums/40-sport...ml#post1133688
Definitely. The one I mentioned is an AGM battery. It packs 2Ah more than the YT12B-BS.

Have a good one.

tony b
2001 ST4 - Thumper
2013 Ural GearUp (sold)
tonered is offline  
 
post #14 of 101 (permalink) Old Sep 17th, 2011, 6:22 pm
Senior Member
 
Join Date: Dec 2010
Location: Jericho Center, VT, USA
Posts: 639
NAPA TS5520 temp curve

I picked up a NAPA coolant sensor - $27.55 with tax, and the NAPA guy brought it to his house so I would'nt have to ride a half hour to the store <g>...
I'm attaching a temp curve I ran for it - does anyone have a temp curve for the OEM part to compare this to? At 68 room temp in the air it sat at 2370 ohms. I started in water at 100 degrees and measured one data set going up to boiling, and another data set going back down. When the water had been boiling for awhile and the sensor settled down it was at 183 ohms.
Attached Thumbnails
Click image for larger version

Name:	NAPA TS5520 Temp Curve.jpg
Views:	15
Size:	50.6 KB
ID:	906554  

Peter Tourin in Jericho Center, VT
'98 ST2, '75 Norton Mk III
ptourin is offline  
post #15 of 101 (permalink) Old Sep 27th, 2011, 10:40 pm
Junior Member
 
stomp944's Avatar
 
Join Date: Feb 2011
Location: San Diego, CA, USA
Posts: 19
Garage
This is a great idea.
Anything further happening with it - like a sticky or consolidation of the list somewhere?
Something else to add:

fuel pump o-ring
- McMaster Carr # 9464K548, $12 per 5 pack
- Viton (Fluorocarbon) O-Ring (black) AS568A-247, 4-7/8 inch O.D. by 4-5/8 inch I.D. by 1/8 inch wide

Sean
'98 ST2 (original owner); '11 MTS1200 Touring
stomp944 is offline  
post #16 of 101 (permalink) Old Nov 16th, 2011, 11:11 am
Member
 
Join Date: Jul 2010
Location: Valencia-Spain, , Spain
Posts: 82
the air filter is the same as porsche 924 AND vw polo

just my 2 cents contribution

St3s ABS EU spec 2007
furylow is offline  
post #17 of 101 (permalink) Old Nov 16th, 2011, 1:19 pm
Mr Leakered
 
tonered's Avatar
 
Join Date: Jul 2008
Location: Lynnwood, WA, USA
Posts: 8,749
Garage
Images: 25
Quote:
Originally Posted by ptourin View Post
I picked up a NAPA coolant sensor - $27.55 with tax, and the NAPA guy brought it to his house so I would'nt have to ride a half hour to the store <g>...
I'm attaching a temp curve I ran for it - does anyone have a temp curve for the OEM part to compare this to? At 68 room temp in the air it sat at 2370 ohms. I started in water at 100 degrees and measured one data set going up to boiling, and another data set going back down. When the water had been boiling for awhile and the sensor settled down it was at 183 ohms.
No, but you could probably just offset the curve 25deg lower.

On that note given the 30deg temps that we are seeing, I am not feeling the need to tape up the radiator with the NAPA sensors installed. The throttle response is excellent in the cold. Not mushy as it was with the original parts.

Have a good one.

tony b
2001 ST4 - Thumper
2013 Ural GearUp (sold)
tonered is offline  
post #18 of 101 (permalink) Old Dec 10th, 2011, 8:15 am
The days are getting longer!
 
va duc's Avatar
 
Join Date: Nov 2008
Location: Mathews County, VA, USA
Posts: 8,278
Images: 12
Thanks to Derek for sourcing these part#'s.

Replacement seat pin's from a newer Super Sport will fit right up.
Part no. 829.2.232.1A list's for $ 26.00 dollars. The attachment screws are part # 777.5.049.2C and list for 50 cents each.

EDIT! The notch that is cut into the pin for proper engagement into the latch is 180 degrees out, it can be rotated to fit properly.



AMA Member
1998 Silver ST2$
Motto Guzzi G2 Moped


va duc is offline  
post #19 of 101 (permalink) Old Jan 20th, 2012, 8:14 am
Senior Member
 
Johnny's Avatar
 
Join Date: Jul 2006
Location: Lincoln, , UK
Posts: 1,195
Brembo and Ducati will not sell you brake seals, KTM will

KTM Part number is 58713021000 REPAIR KIT SEAL.-RINGS DUKE 02

Found, and fitted all works well

Other Brake parts on here from a 2004 Model: 660 SMC Supermoto

KTM BRAKE - BRAKE CALIPER FRONT SUPERMOTO

John

2002 ST4S


Reality is an illusion caused by a lack of alcohol
Johnny is offline  
post #20 of 101 (permalink) Old Feb 23rd, 2012, 1:21 pm
Mr Leakered
 
tonered's Avatar
 
Join Date: Jul 2008
Location: Lynnwood, WA, USA
Posts: 8,749
Garage
Images: 25
I'm feeling confident enough to add the oil cooler o-rings to this thread.

Parker series 5-204 o-rings are replacements for the Duc o-rings leading to the oil cooler on some bikes. It seems that they changed the fittings over the years. Mine had two o-rings on each hose fitting that mates to the threaded fittings just forward of the oil pump.

These o-rings are NOT the standard AS568A type. Those have a minimum width of 1/8in. The Parker series 5-204 are 0.036in wide. You can see these in the linked spec:
http://www.darcoid.com/images/upload...XX%20sizes.pdf

The ones I orders are non-viton and a tad smaller I.D. compared to the originals. The Parker series 5-209 might work and be the same I.D., but I have not tried these.

It seems that prices can vary wildly for these. I found 12 of them for $20, delivered.

Have a good one.

tony b
2001 ST4 - Thumper
2013 Ural GearUp (sold)
tonered is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ducati.ms - The Ultimate Ducati Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Parts numbers 1995 Varese 916 AshleySurfs Superbikes 9 Mar 27th, 2018 5:00 pm
Parts Information bobross900ss Supersport 8 Feb 25th, 2018 12:13 am
Ordering Parts For The Bikes DuckMan Chit Chat 11 Oct 21st, 2017 8:53 am
FS: Genuine Corse Parts 748RS 916R 996RS 998RS 996rshmp Parts and Accessories 1 Sep 15th, 2016 11:44 pm
Online OEM parts for pre-2001 bikes? number9 Superbikes 5 Jul 10th, 2016 7:21 pm

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome