Mod$ picture thread anyone? - Page 2 - Ducati.ms - The Ultimate Ducati Forum
Reply
 
LinkBack Thread Tools Display Modes
post #11 of 957 (permalink) Old Dec 12th, 2007, 11:10 pm
Senior Member
 
slowerthan's Avatar
 
Join Date: Jul 2006
Location: San Francisco Bay Area, CA, USA
Posts: 771
Okay, these pictures of my bike in current form, showng all the mods, was here:

https://www.ducati.ms/forums/showpost...25&postcount=8

Blinged out Yellow '06 SportClassic Sport 1000 Monoposto: Termi 2:2, Ceramic Coated Exhaust, DP Race ECU, Ducshop Hyperstacks, PCIII, SpeedyMoto Clutch Bling, Yoyodyne Clutch Slave, SpeedyMoto Sprocket Cover, Rizoma Timing Belt Covers, DP Bar Risers, Pazzo Racing Levers, Rizoma Billet Grips, Rizoma Bar Ends and Mirrors, Rizoma Reservoirs, National Cycle Fly Screen custom painted, DP Tank Bag/Bra, Storz-Ceriani Steering Damper, Sato Rearsets, Custom Brake Lever Peg by FFR, Nichols Engine Mount Bolts, Nichols Crankcase Cover, GP Fork Cartridges and suspension "magic" by CRST, SuperSprox 14-41 Sprocket/RK 520 Gold Chain Conversion, Alpina STS Tubeless Spoked Wheels, Brembo Gold Line 4 Piston Front Brake Calipers, Feroda Platinum Pads, Galfer Wave Rotors, SSR CNC Gas Cap and Oil Cap, DPCARS Fender Eliminator Kit, Cox Racing Group Oil Cooler Guard.


****************************

Certified Peet's Coffee Junkie
slowerthan is offline  
Sponsored Links
Advertisement
 
post #12 of 957 (permalink) Old Dec 12th, 2007, 11:52 pm Thread Starter
Junior Member
 
juannyducaty's Avatar
 
Join Date: May 2007
Location: chicago, IL, USA
Posts: 25
Thumbs up



great start! keep em coming!
juannyducaty is offline  
post #13 of 957 (permalink) Old Dec 13th, 2007, 12:43 am
Senior Member
 
corks67's Avatar
 
Join Date: Dec 2006
Location: Perth, Western, Australia
Posts: 2,503



Ducati Performance Termignoni Exhaust and ECU kit ($1855) - Dealer
Ducati Performance 14 Tooth Front Sprocket ($70) - Dealer
2004 Ducati ST4S Fully Adjustable Front Forks ($700) Ebay
2000 Ducati Monster S4 Marchesini 5 Spoke Alloy Rims ($900) - ThunderDuc
2001 Ducati 748 Brembo 4 Pot Brake Calipers ($235) - classifieds
Pro-Twin Custom Front Braided Brakelines ($95) - Pro-Twin
Pazzo Racing Adjustable Levers ($200) - Classifieds
Ohlins SD121 Steering Damper ($380) - Kyle Racing
on Kuantings Alloy Bracket ($235) - Kuantin
STM Clutch Slave Cylinder ($230) - Dealer
STM Frame Plugs(4) ($80) - Dealer
Lowered the clipons using PS1000 spacers ($10) - Dealer
Oberon Alloy Brake and Clutch Reservoir Caps ($150) - Ebay
Clay Composites Carbon Fibre Tank & Fork Protectors ($60 and $80) - Clay
Deitrichs Gauge Lowers ($30) - the man himself
DP SC1000 Sports Mirrors ($125) - classifieds
*prices in aussie dollars

Future mods - Im pretty happy with the bike as she is now - actually i was just happy with the termi's and st4s forks - but later on maybe the STM breather, different crankcase cover (speedymoto or desmotimes, NCR if they do one) wouldnt mind trying tidy up the rego plate, some of those Rizoma alloy resevoirs would be nice.

performance wise - powercommander, maybe a lightened flywheel and 1080kit would be nice (in order of affordability)
waseem1969 likes this.

2002 748 & 2005 ZRX1200R

Last edited by corks67; Dec 13th, 2007 at 1:12 am.
corks67 is offline  
 
post #14 of 957 (permalink) Old Dec 13th, 2007, 1:53 am
Senior Member
 
dietrichpfeifer's Avatar
 
Join Date: Mar 2006
Location: Phoenix, AZ, USA
Posts: 2,450
Images: 1
Man, this was harder than I thought. I'm sure I forgot something, but here goes:


dietrichpfeifer is offline  
post #15 of 957 (permalink) Old Dec 13th, 2007, 8:38 am
Senior Member
 
flyingchappy's Avatar
 
Join Date: Mar 2007
Location: Lehigh Valley, PA, USA
Posts: 419
Garage
Quote:
Originally Posted by corks67



Ducati Performance Termignoni Exhaust and ECU kit ($1855) - Dealer
Ducati Performance 14 Tooth Front Sprocket ($70) - Dealer
2004 Ducati ST4S Fully Adjustable Front Forks ($700) Ebay
2000 Ducati Monster S4 Marchesini 5 Spoke Alloy Rims ($900) - ThunderDuc
2001 Ducati 748 Brembo 4 Pot Brake Calipers ($235) - classifieds
Pro-Twin Custom Front Braided Brakelines ($95) - Pro-Twin
Pazzo Racing Adjustable Levers ($200) - Classifieds
Ohlins SD121 Steering Damper ($380) - Kyle Racing
on Kuantings Alloy Bracket ($235) - Kuantin
STM Clutch Slave Cylinder ($230) - Dealer
STM Frame Plugs(4) ($80) - Dealer
Lowered the clipons using PS1000 spacers ($10) - Dealer
Oberon Alloy Brake and Clutch Reservoir Caps ($150) - Ebay
Clay Composites Carbon Fibre Tank & Fork Protectors ($60 and $80) - Clay
Deitrichs Gauge Lowers ($30) - the man himself
DP SC1000 Sports Mirrors ($125) - classifieds
*prices in aussie dollars

Future mods - Im pretty happy with the bike as she is now - actually i was just happy with the termi's and st4s forks - but later on maybe the STM breather, different crankcase cover (speedymoto or desmotimes, NCR if they do one) wouldnt mind trying tidy up the rego plate, some of those Rizoma alloy resevoirs would be nice.

performance wise - powercommander, maybe a lightened flywheel and 1080kit would be nice (in order of affordability)
Corks,
How did you get the Termis to mount over the exhause pipe flange without any gap? I have about .3/4" space for from the wide portion of the tube to the compression ring on the Termi. Any thoughts or mods?
thanks,

2007 Sport 1000s
flyingchappy is offline  
post #16 of 957 (permalink) Old Dec 13th, 2007, 8:48 am
Senior Member
 
livedd0's Avatar
 
Join Date: Oct 2007
Location: Hella Toof Decay, CA, USA
Posts: 673
I think this thread opened the flood gates.

Might as well allow it to grow, and just rename the Topic...




God Does Not Offer Tech Support / '07 - S1000S
livedd0 is offline  
post #17 of 957 (permalink) Old Dec 13th, 2007, 5:22 pm
DrD
Senior Member
 
DrD's Avatar
 
Join Date: Jul 2006
Posts: 1,236
These pics won't show them all, but I give it a shot.

















2006 Ducati Paul Smart 1000 Limited Edition
Purchased New: May 15, 2006
Current Mileage: Approximately 18,000 miles


Modifications

Engine/Drive Train
Ducati Performance Termignoni Exhaust/ECU/Racing Airbox
Fast By Ferracci 1078cc High Compression Big-Bore Kit
Lightened, knife-edged, balanced, polished crankshaft
Ducati Performance Open Race Clutch Cover
Ducati Performance Lightened Flywheel
Ducati Performance Pressure Plate
Ducati Performance Oil Breather
Ducati Performance Cams
Evolutione Billet Clutch Slave Cylinder
Rizoma Billet Aluminum Belt Covers
Speedy Moto Alternator Cover
520 Chain/Sprocket Conversion (15/41 gearing vs. stock 525 with 15/38 gearing)

Wheels/Suspension/Brakes
Ohlins Radial Mount Brake Caliper Kit with Brembo 4-pad/4-piston Radial Mount Calipers
Ducati 1098 Brembo Radial Pump Master Cylinders/1098 reservoir brackets/CRG Levers
Marchesini Lightweight Cast Aluminum Wheels (3.5” front/6.0” rear)
Ohlins “Superstock” Fork Piston/Valve Kit and heavier springs
Ohlins Shock Spring – replaced with heavier spring
Ducati Billet Dust Caps

Comfort/Sport Touring/Appearance Upgrades
Ducati Performance Large Tankbag/Tank Protector
Ducati Performance Multistrada Heated Grips
Motonero Fender Eliminator/Tail-Light Kit
Ducati 1098 Carbon Fiber Front Mudguard
Clay Carrier Carbon Fiber Rear Mudguard
Ducati Performance Bar End Mirrors
ProBolt Billet Reservoir Covers

Dr.D

'06 Paul Smart 1078LE (too many mods to list)
'01 Aprilia SL 1000 (RSV Swingarm, RSV Shock/Dog-Bone, RSV Steering Damper, Renegage Airbox Mod, Heated Grips, Heat-Troller for Heated Gear, Tigcraft 80mm Titanium Exhaust/ECU, Custom Paint)
'89 Honda GT650 Hawk
'98 YZ400F (seized crank, still needs fixin')

Last edited by DrD; Dec 13th, 2007 at 5:29 pm.
DrD is offline  
post #18 of 957 (permalink) Old Dec 13th, 2007, 7:06 pm
Senior Member
 
corks67's Avatar
 
Join Date: Dec 2006
Location: Perth, Western, Australia
Posts: 2,503
Quote:
Originally Posted by flyingchappy View Post
Corks,
How did you get the Termis to mount over the exhause pipe flange without any gap? I have about .3/4" space for from the wide portion of the tube to the compression ring on the Termi. Any thoughts or mods?
thanks,
I think i do have a bit of gap, but perhaps not that much, the shop mounted them up for me and i know at one point they got a bit lose and i took them back and got everything tightened up again. i think a few people have commented on the gap, doesnt seem to effect anything, but i think i would like to take them off again and apply a liberal amount of exhaust gasket before re-fitting them .

2002 748 & 2005 ZRX1200R
corks67 is offline  
post #19 of 957 (permalink) Old Dec 14th, 2007, 3:03 am
Bly
Senior Member
 
Bly's Avatar
 
Join Date: May 2007
Location: Sydney, NSW, Australia
Posts: 3,084
Nothing to see here, move along..
Attached Thumbnails
Click image for larger version

Name:	duke1.jpg
Views:	3036
Size:	135.4 KB
ID:	24368   Click image for larger version

Name:	duke2.jpg
Views:	1253
Size:	119.5 KB
ID:	24369   Click image for larger version

Name:	duke3.jpg
Views:	2287
Size:	241.5 KB
ID:	24370   Click image for larger version

Name:	duke4.jpg
Views:	1305
Size:	261.6 KB
ID:	24371  

Multistrada 1100, sans fairing.
Black SFS.
Bly is offline  
post #20 of 957 (permalink) Old Dec 14th, 2007, 3:10 am
Senior Member
 
corks67's Avatar
 
Join Date: Dec 2006
Location: Perth, Western, Australia
Posts: 2,503
Quote:
Originally Posted by Bly View Post
Nothing to see here, move along..
i thought this was a mods post

2002 748 & 2005 ZRX1200R
corks67 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ducati.ms - The Ultimate Ducati Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Taping a tread for a 748 Rear Hugger? DrGonzo Superbikes 3 Jun 20th, 2006 3:49 pm
Uneven Tread Wear. Lost_In_Spice Ducati Motorcycle Chat 8 Jun 15th, 2006 6:17 am

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome