1098 Yoyodyne Slipper whine on takeoff
I know I know another slipper clutch post. I have read many of them but wanted some input on mine :nerd:. So i just installed this Yoyodyne on my 1098 i did as much research as i could before hand. It seems to be working well except on takeoff i get this whine that was not there before
Mine has started to do this occasionally as well, though not to this degree, so am curious what you find out. My assumption has been that it’s in need of adjustment. Sorry I’m no help.
Im not sure what fixed it as i did all of the things at once hoping it would solve the issue.
I did the Lithium Grease Trick
I sanded the steel plates with 220 grit sand paper.
I replaced the throw out bearing.
I made sure all of the plates were the same direction.
I made sure the stack was a good height
I made sure the springs were not binding on the pressure plate.
|All times are GMT -5. The time now is 8:47 am.|
Ducati.ms Web Community is powered by: vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.