Join Date: Feb 2017
Location: St Augustine, Fl, USA
I just did the extra brake light thing on my 2013 796, I use the Whelan Lin 3 light, ( I have put one of these on every bike I have owned in the last 5 years)
I tapped into the connector in the tool tray area. It is an eight pin Molex type that actually has only six positions used. Two grounds, a stop light, a running/plate light, a right directional and a left directional. It appears this is conventional and not a CANBUS as I had expected so it is easy to check and wire.
I would imagine our bikes are somewhat alike, if you find that connector post a picture or give me the colors on the wires