Output shaft seal part number? - Ducati.ms - The Ultimate Ducati Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 11 (permalink) Old Jun 17th, 2019, 3:12 pm Thread Starter
Senior Member
 
kaysystems's Avatar
 
Join Date: May 2009
Location: Charlottetown, Prince Edward Island, Canada
Posts: 427
Question Output shaft seal part number?

Hi

After searching the 2004 ST3 parts book, I'm really not sure which is the oil seal on the output shaft, behind the front sprocket.

Mine is wearing a little and would like to buy a new one.

I assume that if I remove the front sprocket, I can change the seal.

All help appreciated

Thanks

David

Ducati rider since '74

1966 250 Mark3
2004 ST3
kaysystems is offline  
Sponsored Links
Advertisement
 
post #2 of 11 (permalink) Old Jun 17th, 2019, 4:33 pm
Prolific Poster Award
 
SS904's Avatar
 
Join Date: Sep 2004
Location: Coventry, CT, USA
Posts: 5,514
Garage
It would make more sense if it were shown on the output shaft drawing, but... It can be changed from outside the engine. Careful pushing the new seal in, you can press it in further than you want. Work to keep it flush with the case casting.

[email protected] likes this.

Dan. "Painfully mistaking my big talk for the truth" Samantha Fish.
2003 ST4s (The Truck)
1995 916 (Junk Yard Dog)
SS904 is offline  
post #3 of 11 (permalink) Old Jun 17th, 2019, 5:06 pm Thread Starter
Senior Member
 
kaysystems's Avatar
 
Join Date: May 2009
Location: Charlottetown, Prince Edward Island, Canada
Posts: 427
Thank you.
I wondered if it was that one, but they show it on the wrong side of the casing.

I'll get one ordered

David

Ducati rider since '74

1966 250 Mark3
2004 ST3
kaysystems is offline  
 
post #4 of 11 (permalink) Old Jun 18th, 2019, 6:11 am Thread Starter
Senior Member
 
kaysystems's Avatar
 
Join Date: May 2009
Location: Charlottetown, Prince Edward Island, Canada
Posts: 427
AMS Ducati want more to ship the part to Canada than it actually costs. $35 economy or $110 expedited!

The part is about $34

The hunt is on. I usually find it is cheaper to buy from Europe as the shipping cost is much less.

David

Ducati rider since '74

1966 250 Mark3
2004 ST3
kaysystems is offline  
post #5 of 11 (permalink) Old Jun 18th, 2019, 6:56 am
Prolific Poster Award
 
SS904's Avatar
 
Join Date: Sep 2004
Location: Coventry, CT, USA
Posts: 5,514
Garage
That's brutal. Did you try Ducati Omaha? Any local dealers?

https://www.ducatiomaha.com/pages/ducati-oem-parts

The seal is listed a 35x52x7. Maybe you can find one that fits.

Dan. "Painfully mistaking my big talk for the truth" Samantha Fish.
2003 ST4s (The Truck)
1995 916 (Junk Yard Dog)
SS904 is offline  
post #6 of 11 (permalink) Old Jun 18th, 2019, 7:12 am
Senior Member
 
Blitzen's Avatar
 
Join Date: Jun 2007
Posts: 835
Quote:
Originally Posted by kaysystems View Post
AMS Ducati want more to ship the part to Canada than it actually costs. $35 economy or $110 expedited!

The part is about $34

The hunt is on. I usually find it is cheaper to buy from Europe as the shipping cost is much less.

David
Have you tried a local dealer? Call gpbikes, they donít have duc parts online but they probably do shipping since they do a lot of online business
Blitzen is offline  
post #7 of 11 (permalink) Old Jun 18th, 2019, 5:36 pm
Senior Member
 
Stick's Avatar
 
Join Date: Mar 2004
Location: Greater Worcester Area, MA, USA
Posts: 3,769
I just googled dealers in CA.
This place looks close to PEI ( New Brunswick), but no website. Maybe call them and order the part?

Rallye Motoplex
3.5311 Google reviews
Motorcycle dealer in Dieppe, New Brunswick
Address: 950 Champlain St, Dieppe, NB E1A 1P8, Canada
Hours: Closed ⋅ Opens 9AM Wed

Phone: +1 506-383-1022

Stick -~~~- Need an adrenaline rush? Shove a DUC between your legs.
Present DUCs: 2013 MTS1200S GT, 2003 ST4S, 2001 ST2, 1996 900 SS/CR, 1996 900 SS/SP
Stick is offline  
post #8 of 11 (permalink) Old Jun 18th, 2019, 6:26 pm Thread Starter
Senior Member
 
kaysystems's Avatar
 
Join Date: May 2009
Location: Charlottetown, Prince Edward Island, Canada
Posts: 427
Quote:
Originally Posted by SS904 View Post
That's brutal. Did you try Ducati Omaha? Any local dealers?

https://www.ducatiomaha.com/pages/ducati-oem-parts

The seal is listed a 35x52x7. Maybe you can find one that fits.
Ducati Omaha want $72.00

I will either pick one up when I'm in the UK later in the year, or have it shipped to Florida during the winter. $9

Shipping to Canada via USPS or UPS is outrageous. I don't know why.
I'm trying the local bearing shop first. They must have standard seals

Thanks for the help

David

Ducati rider since '74

1966 250 Mark3
2004 ST3
kaysystems is offline  
post #9 of 11 (permalink) Old Jun 18th, 2019, 6:53 pm Thread Starter
Senior Member
 
kaysystems's Avatar
 
Join Date: May 2009
Location: Charlottetown, Prince Edward Island, Canada
Posts: 427
Quote:
Originally Posted by Stick View Post
I just googled dealers in CA.
This place looks close to PEI ( New Brunswick), but no website. Maybe call them and order the part?

Rallye Motoplex
3.5311 Google reviews
Motorcycle dealer in Dieppe, New Brunswick
Address: 950 Champlain St, Dieppe, NB E1A 1P8, Canada
Hours: Closed ⋅ Opens 9AM Wed

Phone: +1 506-383-1022
Yes, they are close, but don't seem to keep much in stock. I once waited a month for an oil filter. I've emailed them for a quote.

This is why I buy most parts from Europe - cheaper with cheaper shipping, and about a week shipping. I buy Brembo brake pads from the UK at about 30% of Ducati price. Mahle fuel filters too.

I can get the seal on Amazon for $8.00 to $30 with free shipping.

David

Ducati rider since '74

1966 250 Mark3
2004 ST3
kaysystems is offline  
post #10 of 11 (permalink) Old Jun 20th, 2019, 5:56 pm
Senior Member
 
brutus72's Avatar
 
Join Date: Oct 2012
Location: Truro, Nova Scotia, Canada
Posts: 339
I often deal with Motoplex in Moncton , if you are patient with person on other end of phone line they usually have what you after , in my case they send it by bus same day , which is nice .... also why Brembo pads , I just go to my local shop and pick EBC hh pads for reasonable $ .... good luck with your search ....
Craig

'07 ST3s abs , '72 Norton 750 combat , '07 MG Griso
Go Raiders !!!
brutus72 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ducati.ms - The Ultimate Ducati Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome