Ducati.ms - The Ultimate Ducati Forum - View Single Post - Replacing Pressure plate question- HELP!
View Single Post
post #3 of (permalink) Old Feb 1st, 2006, 6:48 pm
SS904
Prolific Poster Award
 
SS904's Avatar
 
Join Date: Sep 2004
Location: Coventry, CT, USA
Posts: 5,549
Garage
A bigger hammer!

Kidding... Sort of!

It can be a real PITA, even after you've had it out before and thought you were going to make things easier for the next time by adding some grease to the shaft!

Last time I sprayed some WD40 on it. Then I drilled a hole in a 2X4. Next, I fed the shaft through the hole and the used it like a slide hammer. I kept whacking the inside of the plate against the wood using the shaft to pull it. Eventually, after a beer or two, it came apart. Not sure if I am making any sense, but that's what I did. Good luck!

Dan. "Painfully mistaking my big talk for the truth" Samantha Fish.
2003 ST4s (The Truck)
1995 916 (Junk Yard Dog)
SS904 is online now  
 
 
For the best viewing experience please update your browser to Google Chrome