Recommendations on rear sets - Ducati.ms - The Ultimate Ducati Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 20 (permalink) Old Aug 20th, 2019, 11:23 pm Thread Starter
Senior Member
 
Join Date: Mar 2015
Posts: 112
Recommendations on rear sets

Thinking of upgrading stock rear sets. don't need professional (read expensive) but quality is important. Any recommendations out there?
Tirefriar is offline  
Sponsored Links
Advertisement
 
post #2 of 20 (permalink) Old Aug 21st, 2019, 6:25 am
Senior Member
 
mojodog's Avatar
 
Join Date: Sep 2005
Location: NW Jersey, ,
Posts: 1,222
Images: 1
I have about 40k miles on a set of Sato knock offs. Bought them used from someone on this site for a $100.

2010 SF, 2011 M796- wife's
A few other and many gone and still missed
mojodog is offline  
post #3 of 20 (permalink) Old Aug 21st, 2019, 7:41 am
Member
 
roadkillrob's Avatar
 
Join Date: Feb 2019
Location: Boston, MA, USA
Posts: 98
Garage
Seems there are not many choices, either pay the 500-700 for brand name, or lots of knock offs on ebay for 90 bucks, but quality - who knows - probably not great.

2012 SF848, 2015 KTM 300 XCW plated
roadkillrob is offline  
 
post #4 of 20 (permalink) Old Aug 21st, 2019, 4:02 pm
Member
 
Join Date: May 2016
Posts: 61
I was looking at getting the Lightech rearsets, they discontinued the sf model.
Currently considering SBK models, I know these won't work with the sf exhaust, does anyone know if they'd work with the QD under tail system?
StealthAu is offline  
post #5 of 20 (permalink) Old Aug 22nd, 2019, 12:20 am Thread Starter
Senior Member
 
Join Date: Mar 2015
Posts: 112
Quote:
Originally Posted by roadkillrob View Post
Seems there are not many choices, either pay the 500-700 for brand name, or lots of knock offs on ebay for 90 bucks, but quality - who knows - probably not great.
Thatís the problem. I guess I would be open to used but not abused set.

Iíve prior dealings with DesignCorsa. Any thoughts on these: https://www.designcorse.com/products...um-rearset-aem
Tirefriar is offline  
post #6 of 20 (permalink) Old Aug 22nd, 2019, 8:40 pm Thread Starter
Senior Member
 
Join Date: Mar 2015
Posts: 112
Just to make sure, the rear sets off the 1098 SBK do not fit the SFS, correct?
Tirefriar is offline  
post #7 of 20 (permalink) Old Aug 23rd, 2019, 2:29 am
Member
 
Join Date: May 2016
Posts: 61
Quote:
Originally Posted by Tirefriar View Post
Just to make sure, the rear sets off the 1098 SBK do not fit the SFS, correct?
They do and they don't.
With the stock exhaust, the right side would need to be spaced out.
It's possible with other exhausts, it will fit without the need for spacers.
pittmeister likes this.
StealthAu is offline  
post #8 of 20 (permalink) Old Aug 23rd, 2019, 9:09 am
Member
 
fulton246's Avatar
 
Join Date: Mar 2019
Posts: 32
Garage
Quote:
Originally Posted by mojodog View Post
I have about 40k miles on a set of Sato knock offs. Bought them used from someone on this site for a $100.
I had a set of Sato knock offs on my previous M696. They were absolute crap. The push rod that goes into the rear caliper screwed itself in and locked up my rear brake. Luckily, I was able to get to the shoulder of the road before a serious accident occurred. When it comes to safety equipment, it's best to stick with quality products that have actually gone through the R&D process.

2017 Yamaha FZ-09 / 2016 Honda CB500F /2013 Triumph Thruxton / 2009 Ducati M1100 / 2008 Suzuki RM-Z250
fulton246 is offline  
post #9 of 20 (permalink) Old Aug 23rd, 2019, 5:24 pm Thread Starter
Senior Member
 
Join Date: Mar 2015
Posts: 112
Quote:
Originally Posted by StealthAu View Post
They do and they don't.
With the stock exhaust, the right side would need to be spaced out.
It's possible with other exhausts, it will fit without the need for spacers.
I have Termis so should be ok. If the stock ones can interchange then I might have line on Woodcrafts
Tirefriar is offline  
post #10 of 20 (permalink) Old Aug 23rd, 2019, 5:25 pm Thread Starter
Senior Member
 
Join Date: Mar 2015
Posts: 112
Quote:
Originally Posted by fulton246 View Post
I had a set of Sato knock offs on my previous M696. They were absolute crap. The push rod that goes into the rear caliper screwed itself in and locked up my rear brake. Luckily, I was able to get to the shoulder of the road before a serious accident occurred. When it comes to safety equipment, it's best to stick with quality products that have actually gone through the R&D process.
Fully agree
Tirefriar is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ducati.ms - The Ultimate Ducati Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome