Anyone got one they wanna unload?

Looking for a few parts for my Hyper. Thought I would throw an ad out there before I buy new. I dont really care about the cosmetics as much on any of these parts. They just have to work. :

-A 2-into-1 System. Doesn't really matter which brand. I have a Quat-D ExBox that I would be willing to trade as well.

-Rearsets. Would prefer Woodcraft but I'm not picky.

-Steering stabilizer. Not picky on brand at all.

Feel free to respond to this thread or shoot me a PM. I'm in no hurry on the parts, I've got all off season to get the bike prepped.

Thanks!

Anyone have a stock clutch with all the plates etc that will fit into my 996. Its a 99btw. Thanks

I have 2 shallow sump de-catted mid-pipes for sale for the XX9 series bikes. Asking $60 for each plus shipping.
PM please.
-David

I am looking for a Near Mint Condition 2006 749 OEM Exhaust without the cannister and lower pipe... Looking for just the Headers / Manifolds for both Vertical and Horizontal Cylinders... and the S-Bend link pipe for the Vertical Cylinder... Hoping to get them in Near Mint condition from a person who replaced their OEM exhaust with a Aftermarket one at the time of purchase or atleast one that has less than 500 miles on it... Let me what you guys got... Thanks in advance... Roland / Ikaika808

I have a set of low swept 91-98 900ss exhaust. Might be usable on a FI 900ss. I had an 01 with carbed exhaust on it. . I am asking $450 obo for the slipons and $50 obo for the headers, they have some scuffs I believe. If anyone is interested let me know. These can sound great just installing a undertail exhaust so I don't really need them now.

Asking $90

Used it for my SF but just got a riser. Its painted black but could use a repaint.

Nearly new set of 53mm clipons in black. Just used the mount on my 1098 for about 3 months. Bars never removed from package.

$225 shipped to continental US

send questions to goldwing702001@yahoo.com

Thanks

Attached Thumbnails

   

My 1997 900SS/SP had a bad day at the track, and I need the following:

windscreen
front headlight/fairing support subframe
oil temperature guage
plastic instrument housing
clutch master cylinder and reservoir
left dash panel and fuse box

Thanks! Joe Bernfeld
bernfeldatearthlink.net

The first bunch...

Some Corse Fueltank internals and mounting brackets plus some tankcap parts (electric lining for fuelpump is also available!)
996RS Corse Front fairingstay with lots of spares and additional carbonparts - 400 Euro
Corse swingarmguard for the long racing swingarm -140 Euro
Corse crash sensor- cuts the electric in case of crash -80 Euro
Corse crankcasebreather 45degree -185 Euro
Corse Dashboard bracket -35 Euro
Corse Clutchcover -40 Euro
Corse 999RS rearbrake carrier -40 Euro
Corse removable Carbon Airboxpanels -80 Euro
Brembo PR Radial brakelever -30 Euro
NCR billet racing footpeg adapterplate 70 Euro both
Titanium Timingbelt excenters for all Testastretta engines - 30 Euro

The Carbonfibreparts are all made by MS Production!!!
Most of the stuff is new and unused

Please ask for further infos and shipping costs

Chris

Brembo Rotors - 320mm Corse Fitment

$375+ shipping costs

Great condition, no scoring, scratches, discoloring, nothing. Going a different route. Looking to get $500.

Pictures available upon request.

Hi,
i'm looking for a mil-spec corsa fuel pump wiring section from a 916/996 as in the picture attached.
PM me if you have anything.
Thanks,
Tom.

Attached Thumbnails

 

Hugger is sold. Thanks for looking.

I have this one that I recently won on Ebay.

http://cgi.ebay.com/ebaymotors/ws/eB...=STRK:MEWAX:IT

This is what the seller had to say about it:

"Rear fender with chain guard. Like new condition, no scratchs or broken tab. High quality carbon fiber by Carbon Works. Looks great on the bike. I took it off because my 2005 999 is becoming a race bike. But when I realized it only weighed what feels like 2 oz. I wanted to put it back on. Unfortunatly the race tires are too large and it dose not fit. I will have it properly packaged by UPS when shipped."

He was incorrect about one thing. The label says it was made by the German company Carbonworld.de.

I never even put it on my bike. When I received it, I woke up to the fact that it's not the longer hugger that I'm looking for.

If you're in CONUS, you can have it for what I paid, which was $118, shipping included.

jD

Attached Thumbnails

     

1998-2003 Stock ST Bars and 1" bar risers with bolts - SOLD

Genuine Ducati factory carbon fiber rear hugger. Part number 56510251A. According to Ducati's website it fits Monster 620, 750, 800,900,1000, Ducati ST, and S4 for 2001 and 2002. Probably fits other years, but I don't know for sure. I can tell you that it does NOT fit ST4s, probably due to the slightly different ST4S aluminum swingarm. Fender is in pretty good condition, has a couple of very minor cracks and blemishes on the clearcoat as shown in the pix, easily fixed with a little epoxy and clear urethane - $80

ST Carbon Fiber Tank Guard. Item is new but has one minor blemish seen in pictures. Will be hard to see when installed or could be easily fixed by injecting some clear epoxy into the blem area. Fits 1998-2002 ST2 and ST4, does NOT fit ST3 or ST4S. - $35

Shipping via USPS Priority Flat Rate Box $6-$10

Prefer Paypal

Thanks.

Attached Thumbnails