Dismounting the Hyper´s footpeg bracket - Ducati.ms

HyperDesmo · Nov 6th, 2010, 2:00 am

Hello to all,

maybe, one of you guys can help. I want to change the footpeg system on my Hypermotard. As far as I got it, the bracket is mounted to the engine by two bolts. But what about the hex screw? Do I have to unfasten it, too?

Thanks for your advice!

Marc

Johnb250 · Nov 6th, 2010, 4:52 am

Hi Marc,

Yes you have to undo the Special screw (hex srcew) you will need a 24mm socket, its not very tight only 30Nm

HyperDesmo · Nov 6th, 2010, 11:08 am

Hi Johnb250,

thanks for this hint! So I am waiting for the new footpegs.....

Cheers, Marc

hyperdookie · Nov 6th, 2010, 2:18 pm

Make sure the bike is on a rear stand since one of those bolt holds the side stand. Some guys have been squashed by their bikes as the side stand pivots when the bolt is pulled.

Bravo51 · Nov 7th, 2010, 2:03 pm

Careful on reinstalling the big aluminum bolts back in. I snapped one of mine because I wasn't paying attention, they really are weak sauce!

stevemuzicman · Nov 8th, 2010, 10:42 am

Quote:

Originally Posted by hyperdookie

Make sure the bike is on a rear stand since one of those bolt holds the side stand. Some guys have been squashed by their bikes as the side stand pivots when the bolt is pulled.

Me.....