getting to the ecu, need instructions

[sinex]

I want to change over the chip from the 2-1-2 to a 2-1 I picked up, i am running de-cat and flapper valve removed, but how to I get to the ECU, Picks and or a step by step guide would be really good, thanks

[johnchypermotard]

Originally Posted by sinex

I want to change over the chip from the 2-1-2 to a 2-1 I picked up, i am running de-cat and flapper valve removed, but how to I get to the ECU, Picks and or a step by step guide would be really good, thanks

no picts, just step-by-step instructions ...

1. remove seat
2. remove fuel tank top cover
3. remove right side tank inside cover
4. remove right side tank cover
5. disconnect battery positive terminal/lead
6. lift up on ECU lever
7. remove ECU (carefully)
8. install new ECU (carefully)
9. press ECU lever in to secure ECU
10. replace right side tank cover
11. replace right side tank inside cover
12. re-connect battery positive terminal/lead
13. replace fuel tank top cover
14. replace seat
15. take bike to dealer to have TPS reset

[sinex]

ah, so the ecu is in the right side cover? thats good as the piper x air filter and box are already installed, so removing just the right side pannel should be easy, once installed i'll have to get the TPS re-set, how is riding the bike with the TPS out? plan to ride bike to dealer, info appreciated