Scott permformance steering dampner - Ducati.ms

bigmacduc · Nov 30th, 2009, 8:56 pm

Any body have 1 on their bike or have any feed back on these.They are a decent price and look the goods?

**Da_Bull** · Nov 30th, 2009, 10:31 pm

I loved mine. Calmed the bike down on the freeway and made me feel better about doing minor power wheelies out of corners and under hard acceleration.

bigmacduc · Nov 30th, 2009, 11:18 pm

Quote:

Originally Posted by Da_Bull

I loved mine. Calmed the bike down on the freeway and made me feel better about doing minor power wheelies out of corners and under hard acceleration.

Your are the man Da Bull.Thankx for all your knowledge.
Seems ye can get them for around $500 USD in yr good country.
Any suggestions where to get good deal.
The MAC....Sunny Perth

minusone · Dec 1st, 2009, 12:15 am

I got mine from the states in about a week and am very happy with it. Read the install instructions carefully so as not to stuff up the theft mechanism

Got mine from ---
Fatbikez.com - Motorcycle Parts and Acccessories <doug@fatbikez.com>

**Da_Bull** · Dec 1st, 2009, 1:44 am

Quote:

Originally Posted by bigmacduc

Your are the man Da Bull.Thankx for all your knowledge.
Seems ye can get them for around $500 USD in yr good country.
Any suggestions where to get good deal.
The MAC....Sunny Perth

You're welcome.

You can get the Scotts from a couple of forum sponsors: JC at Pak Bikes did a group buy when the first run of Scotts were released - he might be able to help you out with a good price. Also, Motovation has them at a low price as well. And, finally, I think Anthony at Desmoworks might also be a Scotts dealer.

Shop around ... there're good prices to be had on the Scotts damper if you take your time. I think I may have gotten mine for close to or under $500 if I remember correctly.

hyperdookie · Dec 1st, 2009, 8:42 am

Mac, the Scott's kit also raises the bars about 10mm. It's not a lot but since you started a thread about bar risers, you'll probably like this. Both the damper and install kit are very high quality and I love mine.
As mentioned before, be careful removing and installing the security ring. If you buy me a plane ticket over there, I'd be happy to lend a helping hand.

Congrats on the new bike

**JCPakBikes** · Dec 1st, 2009, 10:47 am

Thanks man
The full kit at Scotts is $599
Yes we can do a nice discount plus what ever the shipping cost is
California residents have to pay tax as Scotts are based in California
email me at jc@jcpakbikes.com for pricing
JC
If we do a group buy I will need at least 5 orders to make it worth while for a bigger discount.

Quote:

Originally Posted by Da_Bull

You're welcome.

You can get the Scotts from a couple of forum sponsors: JC at Pak Bikes did a group buy when the first run of Scotts were released - he might be able to help you out with a good price. Also, Motovation has them at a low price as well. And, finally, I think Anthony at Desmoworks might also be a Scotts dealer.

Shop around ... there're good prices to be had on the Scotts damper if you take your time. I think I may have gotten mine for close to or under $500 if I remember correctly.

Martyn · Dec 1st, 2009, 11:00 am

Definately a big improvement. The security ring issue. My local Ducati dealer did the install and damaged the security ring on removal - it was glued in, so I had to wait two weeks for another one to come from Bologna. Very happy with the final results.

HyperGirl · Dec 1st, 2009, 11:15 am

Quote:

Originally Posted by bigmacduc

Any suggestions where to get good deal.

I got mine at Motovation for 545. USD
http://www.motovationusa.com/mvstore...idCategory=119

ilsrwy27 · Dec 1st, 2009, 2:02 pm

Scotts dampers are high-end, high-quality units. Can't go wrong with that.