If you have a termi 2-1-2, a question

[BigMac038]

I just put a set on my hyper, and the middle bracket has 3 holes on each side to mount the License plate bracket, and the cans. I only have four bolts. There were only four holes on the stock cans. Where do I get bolt #14 (if you look at the install instructions, thats what they call it)????????

BTW, they look and sound great. They will look better once i figure how to even them out.....

Thanks in advance for any info

[ukmidnite]

I think you need two M8 x 1.25 x 15mm flanged hex bolts

...and good luck evening them out! I gave up in the end, they are nearly straight

[BigMac038]

Thanks again.

Yeah, took about 45 minutes to take off old and put the new cans on, then about 2 hours to TRY and straighten them. Still have to do the airbox, and ecu, but the cans were "pretty" easy.....

[Caidly]

Me= VERY JEALOUS!!!!

NICE!~

[Kinkykelly]

With the stock headers, mine would not line up right, but once I changed out to the Zard collectors everything lined up perfectly.

-KK