TPO Beast Pods Installation Question!

[TurboMonster]

As part of my Turbo project I need to remove the Stock air-box....
Ducati HyperMotard Turbo Project

I have a questing for those who have removed there air-box for the TPO Beast or Beast-R Pods . On the bottom of the stock air-box there is a vent line going straight down connected to what Ducati calls a "Stepper Motor". What did you do with this vent line when you removed your air-box?

I circles the vent line on the following part diagram:
http://www.DucCutters.com/johnson/HMIntakeManifold.pdf

Any help would be great appreciated.

[dragoontwo]

I left mine open to atmosphere until CA Cycleworks sent the little filter kit.

You might be able to find the filter at TPO parts.

[jborders5]

This is the filter for the idle stepper motor hose:

http://www.summitracing.com/parts/KNN-62-1020/

This is the filter for the crankcase if you decide keep the hose in place and want to attached the filter where the hose originally attached to the air box:

http://www.summitracing.com/parts/KNN-62-1030/

[TurboMonster]

Thanks for the help!