termi 2-1 fitment issues? - Ducati.ms

johnchypermotard · Nov 14th, 2008, 12:39 pm

ciao a tutti -

anyone with a termi 2-1 have any issues with the silencer hanging a little too close to the rear tire?

i installed the system following instructions (i got a color PDF that the photos are actually clean and clear, unlike the standard photo copy of a photocopy crap that usually comes with dp parts) ... and also looked at two other local hypertards with the termi 2-1 system installed ... and the silencer on my hypertard hangs a little too close to the outer right edge of the rear tire.

it looks like under full compression of the rear, that the tire will contact the silencer by perhaps 1/16". the front of the silencer will clear the tire, it's the rear half of the silencer i am worried about.

a presto,
johnc

supermoto292 · Nov 14th, 2008, 1:39 pm

Mine looked the same way when i installed mine to. But, 5,000 miles nock on wood it has not hit yet.

Ferrell75002 · Nov 14th, 2008, 1:50 pm

John,
Is there anyway you could forward me those color instructions ? If you wouldn't mind, it would be greatly appreciated.

hyperdookie · Nov 14th, 2008, 3:07 pm

Quote:

Originally Posted by johnchypermotard

ciao a tutti -

anyone with a termi 2-1 have any issues with the silencer hanging a little too close to the rear tire?

i installed the system following instructions (i got a color PDF that the photos are actually clean and clear, unlike the standard photo copy of a photocopy crap that usually comes with dp parts) ... and also looked at two other local hypertards with the termi 2-1 system installed ... and the silencer on my hypertard hangs a little too close to the outer right edge of the rear tire.

it looks like under full compression of the rear, that the tire will contact the silencer by perhaps 1/16". the front of the silencer will clear the tire, it's the rear half of the silencer i am worried about.

a presto,
johnc

Just crank up the preload and keep the airs onder 10ft and you'll be okay.

johnchypermotard · Nov 14th, 2008, 4:02 pm

Quote:

Originally Posted by Ferrell75002

John,
Is there anyway you could forward me those color instructions ? If you wouldn't mind, it would be greatly appreciated.

PM me with your email address, and i will send the color PDF.

johnchypermotard · Nov 14th, 2008, 4:44 pm

btw, i tried uploading the PDF here, but the file size is too big for this forum.

**BillyD** · Nov 14th, 2008, 4:56 pm

If you are out by my house, stop by and you can compare with my bike this weekend.

johnchypermotard · Nov 14th, 2008, 4:57 pm

Quote:

Originally Posted by BillyD

If you are out by my house, stop by and you can compare with my bike this weekend.

grazie bill ... i appreciate.

frique · Nov 14th, 2008, 6:21 pm

My first race Termi was bent wrong from the factory and had to be replaced. Hard to say if yours is doing the same thing without pics. Mine wouldn`t line up right at all. Stuck way out from the tire. Sounds like the opposite of yours

johnchypermotard · Nov 14th, 2008, 6:52 pm

Quote:

Originally Posted by frique

My first race Termi was bent wrong from the factory and had to be replaced. Hard to say if yours is doing the same thing without pics. Mine wouldn`t line up right at all. Stuck way out from the tire. Sounds like the opposite of yours

yup ... sounds like opposite issue.