Trying to find how to get the Ducati Desmo Challenge tail section

[supermoto292]

I have called everbody i know and they do not know how to get it. I know the techna group has information on the kit but they are over seas. I have emailed them with no response. From what i have read Ducati and place called Neotech got together and made these racing kits for the bikes. I keep seeing people here in the USA with this tail section and belly pan, but nobody will say were they got it from. If anybody has any info how to get these parts hit me back. Heres some pics.

Thanks Dustin

[matt2065]

And where does one get those handguards?

[bmartinek]

I have been jonesin' for that tail ever since I saw the Tosa' Hypermotard. Please someone out there has to have a lead.

[Squiffything]

Originally Posted by matt2065

And where does one get those handguards?

The handguards can be had from these guys http://www.acerbis.com/p106_handguard/1325.html

They have produced a HM version which Ducati sell as a DP part

[Squiffything]

Not sure if this is the same but these guys do a rear section in CF which you could have painted up

http://www.desmoworks.com/index.php?...roducts_id=366

[DUC_54]

Does anybody have pictures of this tail section on a hyper with ther 2-1-2 termi system??? Can't seem to find pics of that combo Thanx in advance!!!

[mooner]

I contacted the people who run the Italian Desmo Challenge, this what they sent me:

l costo delle pedane racing èdi euro 400.


Buongiorno !!!! Ecco i prezzi del " Kit Racing Hypermotard "
Vasca e portanumero sono già nero opaco

IT'S AN NEW MODEL REGISTERED

Cupolino anteriore--------------------------------250
Codino-----------------------------------------------230
Vasca motore--------------------------------------210
Portanumero sx-------------------------------------25
Portanumero dx-------------------------------------25
Staffe in acciao per vasca ----------------------40
Staffa in acciao per codino---------------------20

Iva e trasporto esclusi.

Cordiali saluti, Claudio Pacifici.

[Dallara]

Which, according to Babelfish, says...

"l cost of the footrests racing èdi euro 400.

Buongiorno! Here the prices of the " Kit Racing Hypermotard "
Bathtub and portanumero are already black opaque

IT' S AN NEW MODEL REGISTERED

Front Cupolino----------------------------------250
Codino-------------------------------------------230
Motor bathtub----------------------------------210
Portanumero sx----------------------------------25
Portanumero dx----------------------------------25
Stirrups in acciao for bathtub------------------40
Stirrup in acciao for codino--------------------20

Excluded Vat and transport.

Sincerely yours, Claudio Pacifici."


Which means that personally I am still as confused as I was previously...

I've been looking for one of these tail sections, too, and for a while now, and haven't had a bit of luck so far, either. One would think there might be at least a tiny amount of money to be made importing and selling these in the USA and elsewhere...

Hopefully this thread, or others, will one day produce a ready source to obtain one.

Dallara

[Jamesb]

so that sort of say this then,it was only an on line tool so dont shoot me if its wrong !!

Cost of the platforms racing European èdi 400.

Good morning!!!! Here the " Kit's Racing Hypermotard "
prices Tub and portanumero are already black opaque
New IT'S AN anterior MODEL REGISTERED
Cupolino -------------------------------- 250
Pigtail ----------------------------------------------- 230
Tub motor -------------------------------------- 210
Portanumeros sx ------------------------------------- 25
Portanumeros dx ------------------------------------- 25
Portanumero dx ------------------------------------- 25
Stirrups in acciao for tub ---------------------- 40
Stirrup in acciao for pigtail --------------------- 20
Iva and transport excluded.

Kindest regards, Claudio Pacifici

[georound]

Front Cupolino----------------------------------250 (Rear tail section)
Codino-------------------------------------------230 (Front nose piece)
Motor bathtub----------------------------------210 (Belly pan)
Portanumero sx----------------------------------25 (Left or right number plate)
Portanumero dx----------------------------------25 (the other number plate)
Stirrups in acciao for bathtub------------------40 (brackets for bellypan)
Stirrup in acciao for codino--------------------20 (brackets for nose piecE)

Excluded Vat and transport.

Sincerely yours, Claudio Pacifici."[/I][/B]


Which means that personally I am still as confused as I was previously...

I've been looking for one of these tail sections, too, and for a while now, and haven't had a bit of luck so far, either. One would think there might be at least a tiny amount of money to be made importing and selling these in the USA and elsewhere...

Hopefully this thread, or others, will one day produce a ready source to obtain one.

Dallara[/QUOTE]