Power Commander Question

[gdubduc]

I have a PCIII for my 08 hyper, but I've read on this forum that you cannot adjust the fuel under 25% of throttle. And on the pre-configured maps downloaded from powercommander.com, you can see that they don't adjust anything beneath that throttle level, though the cells are there and they are modifiable (in theory).

Can any one explain to me why that is?

Thanks,


Garth

[MarksFriggin]

The PCIII will adjust under 25% throttle on a Ducati Performance ECU, just not the stock ECU.

I believe they (Ducati) don't allow the mods on stock ECUs because of emissions regulations.

[SquireSCA]

Originally Posted by MarksFriggin

The PCIII will adjust under 25% throttle on a Ducati Performance ECU, just not the stock ECU.

I believe they (Ducati) don't allow the mods on stock ECUs because of emissions regulations.

So if you have one of the DP ECU's, you can add a PCIII and remap anywhere you want, correct?

[MarksFriggin]

Originally Posted by SquireSCA

So if you have one of the DP ECU's, you can add a PCIII and remap anywhere you want, correct?

I believe that's correct from what I've been told by Dynojet tech support.