sc project 2-2 for evo sp??

[jenner]

This might have been asked before but I did a search and couldnt find any info. I looked on sc projects website and cant seem to find the 2-2 for a 2010 evo sp. Anyone know if they are planning to make one? or am I just missing it on the website.

[johnnie27]

no there not i spoke to them a while ago, they would even sell me the 09 bike one so i could just modify the flanges....so i built one (well not me my exhaust dude)

[jenner]

Would the 09 stuff mate up with everything else by just tig welding on the proper flanges?

Does anyone else know of a dual side mount exhaust for the 2010 evo sp?

[johnnie27]

Originally Posted by jenner

Would the 09 stuff mate up with everything else by just tig welding on the proper flanges?

Does anyone else know of a dual side mount exhaust for the 2010 evo sp?

well i had one built, any good exh builder could do it, and i did you so i can still dink my GF as i think the SC does away with passenger pegs

you will need to get someone to flare the part that goes into the motor and make some flanges (it just comes out on a slighly diff angle than the old donk...what SC told me..anyhow they wouldn't sell me one ..here is a pic of mine, during and after

[jenner]

That turned out really nice I guess I will have to search around and see if I can find a reputable fabricator close by. Thanks for posting up the pictures

[johnnie27]

your welcome, all up with having custom made flanges and some other bits it cost me $1100 AUD one fabricator quoted me $3000.00!!!! ...but my car exhaust guy said it was quite straight fwd (he does do alot of fabrication thought hot rod , race boat headers etc) he just ordered some mandrel bends and put it all together (the hardest part was getting the mufflers to sit at exactly the same height and angle on each side...the mufflers cost me about $400 each (i think) and have DB killers should you need them the are QD magnum series (from moto-wheels in the usa) bike is very loud w/out them...