No Display - Just Flashes

[RoninMX]

My Hyper has been parked since Aug 2009. It was garaged, up on stands and covered the whole time. I went to fire it up today, and it started but the entire dash display is flashing on/off. No characters show, the whole thing’s grey.

Any ideas?

[Decreasing Dave]

Low juice??

Dave

[RoninMX]

It’s got enough juice to fire up and idle for a couple of minutes which I’ve done this a number of times. The dash just never comes up, it’s just a blank grey screen. Other than that the bike seems to run just fine.

I’m going to try the stock ECU and see if that has any effect.

[1sicmofo]

Originally Posted by RoninMX

It’s got enough juice to fire up and idle for a couple of minutes which I’ve done this a number of times. The dash just never comes up, it’s just a blank grey screen. Other than that the bike seems to run just fine.

I’m going to try the stock ECU and see if that has any effect.

Personally i would disconnect the battery for about 15 mins before reconnecting, thats how we fix the husky motard dash.

[RoninMX]

I tried that. Left it unhooked for a couple hours. No go

[motodave]

disconnect the dash for about 15minutes, if that doesnt work time for a new dash.....