Hypermotard EVO switches - Ducati.ms

EIGHTfortyEIGHT · Apr 30th, 2011, 5:40 pm

Does anybody know if the new slim line switches on the new Hyper EVO will plug directly in to the old Hyper 1100s wire harness. The 1100s have 2 small connectors for the left indicator side and 1 small connector for the start side.

Has anybody looked at their EVO to see what the connectors for the switches look like?

Thanks for the help

Crackerr · May 2nd, 2011, 7:44 am

Quote:

Originally Posted by EIGHTfortyEIGHT

Does anybody know if the new slim line switches on the new Hyper EVO will plug directly in to the old Hyper 1100s wire harness. The 1100s have 2 small connectors for the left indicator side and 1 small connector for the start side.

Has anybody looked at their EVO to see what the connectors for the switches look like?

Thanks for the help

I will report back later in the week. I have a start/stop switch coming wed or thurs from a 2010 to try to fit to my 2009 1100.

DemonTweaks · May 2nd, 2011, 12:49 pm

Interesting question! I like the look and functionality of the new ones too. Even been thinking of a dash swap... But that likely won't work cuz' of the Seimens vs. Magneti Marelli...

Crackerr · May 4th, 2011, 7:41 pm

Haven't forgotten, still waiting for the part to arrive.

EIGHTfortyEIGHT · May 4th, 2011, 9:01 pm

Thanks

I found pics on Ebay of the Streetfighter switches. The rt side connector looks the same, but the left side is a single connector instead of 2 small connectors on the 1100s.

Could not find any pics of the new EVO switches. I'm betting the rt side will work. The part numbers are different between the SF and EVO, but that might just be length.

Crackerr · May 11th, 2011, 7:06 am

Thanks USPS!
No switches anytime soon as USPS lost my package