|
This is based on the picture provided in the installation instructions for the chip. Looking at the ECU so that the cable connections are on the left, the notch on the board will orient towards the cable connections and the chip will plug into the board so that the writing on the chip is right side up (i.e readable, not upside down). If needed, I can try to scan the instructions.
__________________
93 900 SS
01 996 Mono
00 ZXR 400 SP
06 Daytona 675
Last edited by Desmo93; Sep 11th, 2006 at 12:57 am.
|
