Motowheels 996R project - Ducati.ms

moto · Jun 10th, 2007, 1:06 am

The 916SP has been replaced with 996R. It started off as a race bike, became a dedicated track bike and now it will end up as a street/track bike.

The first thing we did was take it down to bare frame:

We started to take some of the parts off of the 916SP and added some other parts off the shelf:

SpeedyMoto Underbody Frame Slider: 998,749S,999: http://tinyurl.com/2rrrm9
SpeedyMoto Billet H2O Pump Housing: '02+: http://tinyurl.com/3446u3
MW Billet Reverse Shift Lever: Ducati : http://tinyurl.com/2unmy4
Fren Tubo Kevlar Clutch Line: 748-998 http://tinyurl.com/357mgt

MW Billet Adj. Rear Set: 748-998 - http://tinyurl.com/2mcdhz
CF Heel Guards: 748-998 "Corse" - http://tinyurl.com/37cqhh
CF Swingarm Guard: 748-998 Race Style(OEM)- http://tinyurl.com/2m8lgd
CF Chain Guard: 748-998 "Racing" - http://tinyurl.com/2stg34
CF Sprocket Cover - http://tinyurl.com/2j95pm

Hidden under the CF swingarm cover is a magnesium swingarm:
Ducati 748-998 Magnesium Swingarm - http://tinyurl.com/2o7ct8
The swingarm is clearcoated to protect it from the elements.

Details:
Long Chain Rub: MAG Swingarm - http://tinyurl.com/3y5l9b
WSBK Ride Height Adjusting Rod - http://tinyurl.com/2utpsq
Billet 12 Pt. Axle Nut: 748-998,MH, S4R,MTS- http://tinyurl.com/3ad6b7
Evo Quick Change Sprocket Carrier: Ducati -http://tinyurl.com/2rlfyg
Titanium/urethane cush drives-
Billet Sprocket Hub Cover: SS SA- http://tinyurl.com/39rvhr
Ohlins Rear Shock 748-998 w/hyd preload - http://tinyurl.com/2tqj24

The mag swingarm comes with all titanium hardware and billet rocker with two positions:

Jun 10th, 2007, 1:11 am

Sweet!

moto · Jun 10th, 2007, 1:27 am

BST CF Rear "Race" Wheel: 748-998 6.0"-http://tinyurl.com/2p33nq

DP "Corse" Billet Rear Wheel Nut: 748-998,MH,S4R,MS - http://tinyurl.com/3ccrry

Brembo SBK Rear 2 Piston Caliper - http://tinyurl.com/2nwl4x
Brembo Narrow 200mm Rear Rotor: 998,S4R - http://tinyurl.com/2mz7ej
Billet Rear Caliper Carrier: 748-998 - http://tinyurl.com/3yg4ag
Michelin Power Race 190/50ZR17 Rear -http://tinyurl.com/2u9hl3

We dropped a lot of weight on the rear suspension (at least 16 pounds)...

moto · Jun 10th, 2007, 1:52 am

The front end features a magnesium triple clamp in a 53.5/58 to fit the Ohlins Superbike forks.

Cast Magnesium Triple Clamp Set: 748-998 - http://tinyurl.com/2qhuvz We clear coated te magnesium to protect it fro the elements.

Since it is a track bike, we installed an
Ignition Bypass Switch: http://tinyurl.com/2swmdh

CF Fuel Tank: 748-998 -( http://tinyurl.com/2p5rwn ) was painted red with some carbon exposed.

moto · Jun 10th, 2007, 9:14 pm

Brembo Monoblock Racing Caliper- http://tinyurl.com/2pyfta
Brembo Front "Narrow Band Ducati/Corse" Rotor - http://tinyurl.com/328d4k
TI Front Axle: 748-998/Monster/SS/ST - http://tinyurl.com/2mp8fa
SBK Speedometer Spacer: 748-998 - http://tinyurl.com/2muox4
TI Front Rotor Bolts: Ducati Button - http://tinyurl.com/36d5l2
TI Front Caliper Mounting Bolts: Standard - http://tinyurl.com/2s6t6b
TI Fork Axle Pinch Bolts - http://tinyurl.com/36ugbg

BST CF Front "Race" Wheel: 748-998 - http://tinyurl.com/3yufyw
Michelin Power Race 120/70ZR17 Front - http://tinyurl.com/2ojeda

moto · Jun 11th, 2007, 4:13 pm

CycleCat Adj. Riser Clip-ons: 748-998 - http://tinyurl.com/28jew7
were bored out to fit the Ohlins Superbike forks (53.5).

CycleCat Handle Bar Sliders - http://tinyurl.com/yo4sm3

Brembo "GP" Radial Brake Master Cylinder 19x20 - http://tinyurl.com/ytwg5v
Brembo "GP" Billet Radial Clutch Master Cylinder - http://tinyurl.com/2496uv

moto · Jun 11th, 2007, 11:20 pm

The exhaust is a superlight weight HPE Inconel 54mm full system supplied by NCR. This is made by the famous Ferrari exhaust company TUBI. It has a titanium canister.

moto · Jun 13th, 2007, 12:19 am

Ducati Corse MAG Slotted Clutch Case: Ducati - http://tinyurl.com/34khqc
Surflex "Slipper" Clutch w/ Plates - http://tinyurl.com/2vzs3x
MD Aluminum Clutch Cover: 105 - http://tinyurl.com/2w42td
CF Cambelt Cover: 749/999 - http://tinyurl.com/2qu6uk
TI Rear Brake Lever Pivot Bolt -http://tinyurl.com/2rxs9g
TI Rear Brake Clevis: Ducati - http://tinyurl.com/2t7qg2
TI Swingarm Pivot Kit: 748-998 - http://tinyurl.com/34yrvg

moto · Jun 14th, 2007, 10:39 am

We painted the rear subframe red along with the frame.

Installed:
CF Oil Breather Box: 748-998- http://tinyurl.com/38o276
STM "Racing" Oil Breather - http://tinyurl.com/34dr5u
MotoWheels Corse in Box Oil Breather Valve - http://tinyurl.com/2qpphj

apagios · Jun 14th, 2007, 3:28 pm

Looking incredible so far!

Can I assume we will be entitled to detailed finished pics when your done?
And does your company accept souls as a form of payment?