Mikuni carb rubber parts

[duc96cr]

I am cleaning my BDST's and I see I have some dried up o-rings and rubber parts. Does anyone know where I can buy a kit containing all the rubber stuff or do I have to buy each piece separately ? I see evidence that I am getting internal leakage in the float assy. Might as well replace all while they are apart.

[Joe-B]

Sudco International - Modern and Vintage Replacment and Performance parts for Street Bikes, Dirt Bikes, ATVs and Personal Watercraft, Used Classic Bikes. ?

[punch455]

Hey duc,
When I rebuilt my Mikunis, I ordered the parts through Ducati Omaha, and found the part numbers through this forum. If I remember correctly, there was a gasket that fit between the carb body and the jet housing, the main jet o-ring, the float bowl gasket, and one other small part. All are needed to do the job correctly. I kept the parts baggies with the oem part numbers on them, and when I get home I'll post them. Till then, try another search. I'm sure their here somewhere.

[punch455]

Found it. Entering the part numbers in the thread below into an OEM part search will give a description of what it is.

where to buy carb rebuild kits

[Duc Dodgers]

Just completed a rebuild myself. Sourced most of the gaskets/O-rings from across the pond. Yamaha TDM-850 uses the same carb so somewhat comprehensive kits are available in the UK. Take your pick.

tdm 850 carb | eBay

Also came across these sites though I have no first hand experience with either.

Carb Kit Capital - Motorcycle Carb Parts

and

1993 Yamaha TDM850 OEM Carburetor Parts | MotoSport

Between the above and the dealer you should be able to acquire all the bits needed to rebuild your carbs.. Good wrenching.