|
speedometer drive seal
I am putting on the Marchesini 10-spoke forges aluminum wheels I bought over the winter. Does the speedometer drive seal get installed flush with the edge of its bore or does it get pushed to the shoulder. I have it pushed to the shoulder. The new seal was a real tight fit and the metal face is not square, kind of pushed inwards to the bearing. The seal is a loose fit on the speedometer drive, so it doesn't appear to do a lot. Any thoughts? Should I try a new seal? (I had to wait two weeks to get this one. The guy at the Ducati dealership said Ducati closed their US warehouses and everything is coming from Italy.)
Spring is coming to the Midwest!
Larry
|
Linear Mode
