Epic funny install of Fatducs

[Ducposer]

So after many hours pouring over the plethora of information on this site about 02 manipulators and exvl errors I decided to go with the Fatducs. Although I wrote down exactly what both Duc.ee and Fatducs accomplish I managed to completely confuse the two after the arrival of the Fatducs. Because I installed the Leo Vince full system (thanks GeeBee!!!) most of the servo stuff got taken out. The only thing that was left was the servo motor. So to install the Fatducs I finally removed the servo motor - Wait wut... Thats right in the midst of trying to install the Fatducs I confused myself and now have removed the servo motor and havent even ordered the Duc.EE. Well I guess Ill just finish the install of the Fatducs and wait for the Duc.ee. What makes this worse is that I just finished putting on a fresh set Of Pr3 tires. I was so hott to trott with the new tires and now I've made the bike inoperable untill the Duc.ee comes.

[Ducposer]

Oh yea, Where do I get Duc.EE the website says its down.

How to order a MotoCreations Duc.EE
“We are closed through January 2nd, 2012.. In the interim please order from”: Monster Parts: Ducati Monster Parts and Accesories

Where have people ordered theres from?


But on a serious note, the Fatducs are not labeled vertical or horizontal, they look exactly the same and have no markings.

[Turkishexpress]

Wait... If you got the Leo Vince system why do you need the duc ee? The windpipe comes with the servo cable eliminator that is more reliable than the duc ee.

[mollycbr123]

Originally Posted by Ducposer

But on a serious note, the Fatducs are not labeled vertical or horizontal, they look exactly the same and have no markings.

Lay the fatducs out side by side. The one on the left connects to the vertical cylinder, the one on the right to the horizontal.

[Ducposer]

Originally Posted by Turkishexpress

Wait... If you got the Leo Vince system why do you need the duc ee? The windpipe comes with the servo cable eliminator that is more reliable than the duc ee.

It comes with a small piece that fits onto the servo. It basically makes it the servo cannot fully rotate. From day one the exvl error has shown up on my dash. No amount of futzing has produced different results.

[Ducposer]

Originally Posted by mollycbr123

Lay the fatducs out side by side. The one on the left connects to the vertical cylinder, the one on the right to the horizontal.

wut?

[Ducposer]

So this was my quick fix for the servo

[oleary]

Originally Posted by Ducposer

So after many hours pouring over the plethora of information on this site about 02 manipulators and exvl errors I decided to go with the Fatducs. Although I wrote down exactly what both Duc.ee and Fatducs accomplish I managed to completely confuse the two after the arrival of the Fatducs. Because I installed the Leo Vince full system (thanks GeeBee!!!) most of the servo stuff got taken out. The only thing that was left was the servo motor. So to install the Fatducs I finally removed the servo motor - Wait wut... Thats right in the midst of trying to install the Fatducs I confused myself and now have removed the servo motor and havent even ordered the Duc.EE. Well I guess Ill just finish the install of the Fatducs and wait for the Duc.ee. What makes this worse is that I just finished putting on a fresh set Of Pr3 tires. I was so hott to trott with the new tires and now I've made the bike inoperable untill the Duc.ee comes.

Nah, you can still ride it - just ignore the EXVL light!

[oleary]

Originally Posted by Ducposer

wut?

Wrong! The one on the left connects to the horizontal cylinder.

No, wait, ... uhhhh.




Seriously, he's pulling your leg ... they are interchangeable.

[Bob_Cooper]

Originally Posted by mollycbr123

Lay the fatducs out side by side. The one on the left connects to the vertical cylinder, the one on the right to the horizontal.

very good