DZUS conversion on '06 ST3s - Ducati.ms

jentech · Jan 25th, 2012, 11:19 am

Has anyone done a conversion on the '06 ST3S with the DZUS quick fasteners? I've seen lots of posts for older models and the Desmotimes kits supposedly don't work for the newer STs for some reason. What sizes (6x19mm?) do I require? and are there any problems I might come across. Thanks.

rickmillertx · Jan 25th, 2012, 4:15 pm

I did it on mine. All I had to do was make the holes a little larger to accept the fasteners. Did have to order slightly longer fasteners but I don't remember the size.

I did not replace the 2 big screws on the belly pan. The two larger screws near middle on the sides. Also didn't replace the recessed screws that are vertical between the top and mid fairings.

jentech · Jan 26th, 2012, 10:42 am

Thanks for the info, I'll keep digging for bolt sizing.

rickmillertx · Jan 26th, 2012, 11:29 am

I couldn't leave this hanging, so I went out and measured the length of the fasteners. They are 19mm.

jentech · Jan 26th, 2012, 1:26 pm

Quote:

Originally Posted by rickmillertx

I couldn't leave this hanging, so I went out and measured the length of the fasteners. They are 19mm.

Awesome! Thanks for this.