Axle spacer order in rear wheel???

[furylow]

Hi everybody!
Does anyone have a photo or a picture of how the hell is the rear axle of a st3s?
I have the workshop manual but its not talking about the S version, so what, I have dismantiled the rear wheel and I dont remember how the spacers where placed into the axle...

any help is welcomed!

[DuckMan]

There's really only the one small conical spacer that goes on the left side, next to the sprocket. The wider side goes against the swing arm and the pointy end against the sprocket carrier. If you pulled the carrier out of the wheel, the one in it slips into the carrier from the inside. Again, if you look, the pointy end will match the size of the wheel bearing inner race.

[furylow]

Thanks mike, it was exactly the info I needed!

[MarkST]

Hi furylow,

when you say you have the workshop manual, do you also have the parts pdf ?

Download it here if not - Ducati
Enter year, family, model, languages, and download.

Also put your bike model and year in your sig.

Mark.

[furylow]

Also thanks to you mark. This is very helpful!

I'll mend my profile... !