TPS & Emissions - Ducati.ms

danrduc · Oct 11th, 2011, 1:15 am

Does anybody "KNOW" what if any effect the TPS has on the bikes emissions? I have my own thoughts, but would like to KNOW some facts if there are any available.
I believe the OEM setting was 5+ ohm's, but the recommended was less than 5, 4.6 or so. that is what I set mine at during set up a while ago.
Having trouble with CO's, at the moment.

va duc · Oct 11th, 2011, 9:58 am

I don't know of any ohms settings, LT talks about setting the TPS at certain mvlts.
Interesting read:
http://www.bikeboy.org/fuelinjection.html

http://www.bikeboy.org/ducati2vthrottleb.html

danrduc · Oct 11th, 2011, 5:31 pm

Yes, maybe it was milivolts rather than ohm's it has been awhile, have to dig out my paperwork.
I am also thinking the trim pot could be ineffective for one reason or another. It doesn't seem to make any difference in the running that is fantastically noticable.