|
The cuntershaft nut is 32mm. I found this torque value for the same nut size.
I assume this is correct but would like to confirm.
------------------------------------------------------------
Originally Posted by emjay
Useful specs for swapping the front sprocket...
front sprocket retaining nut - 32mm
rear swingarm wheel nut - 30mm
chain tension adjuster bolts - 14mm
torque setting for front retaining nut - 135 ft/lbs
Thanks to the folks at Ducati Seattle for the torque info. They weren't 100% positive about the setting, but its an identical setup to one of the supersports, and 135 is the torque setting for that bike.
|
