New
Corse Dynamic products for the 748-998:
CORSE DYNAMICS Ride Height Tool
$69.95
Corse Dynamics has engineered a tool for measuring ride height that works with several Ducati models
(748/916/996/998/848/1098/1198)
To accurately measure the ride height support the bike so that the rear suspension is free of load (we suggest supporting the rider pegs on jackstands), measure the ride height from our tool to a consistent reference point on the bike. Now you have a way track ride height with modifications performed on the bike.
UNLIKE OTHER TOOLS ON THE MARKET WE MADE THE FRAME INSERTS CORRECT SO NO DEBURRING IS NECESSARY TO FIT OEM FRAMES.
CORSE DYANMICS SBK Speedometer Spacer: 748-998
$49.95
Billet spacer to replace the speedo drive on 748-998. Perfect for race bikes or when converting to the digital dash. Also used for Sport Classic or Multistrada front wheel conversions when using a 748-998 type wheel. Anodized black to prevent corrosion.
CORSE DYNAMICS Lightweight Sprocket Spacer
$23.99
One of the most cost effective ways to reduce .25 lbs of unsprung rotational weight. This is a reproduction of the steel OEM spacer made in Billet 7075 Aluminum and then hard anodized for superior strength.
Replacement part for the following bikes:
Hypermotard 1100, Monster 1100, Monster S2R800, Monster S2R1000, Monster S4R, Monster S4RS, Multistrada 1000, Multistrada 1100, 748 (2000-2003), 998, 996 (2000-2002),
Required for aftermarket sprocket hub covers for the following bikes:
748 (1994-1999), 916 (1994-1998), 996 (1999)
Pictured showing both sides and quality machining.
OEM weight .30 lbs, Corse Dynamics weight .05 lbs
CORSE DYNAMICS Oil Fill Plug
$14.95
Corse Dynamics fill plugs are a great way to upgrade your Ducati with a part that is both beautiful and functional!
- Our "double hex" design allows you to remove or install these plugs with either the factory tool OR an ordinary wrench or socket.
- Our plugs incorporate a Viton O-ring to ensure proper sealing against the engine. This provides a good seal every time
- Our plug comes pre-drilled for safety wire on all six faces
CORSE DYNAMICS Lightweight Wheel Spacer
$17.95
Corse Dynamics lightweight front wheel spacer reduces .10 lbs of unsprung weight from your bike.
Replaces the factory steel spacer for the following bikes:
749 / 999 / 848 / 1098 / 1198 / Monster S4RS / Monster 1100 / Hypermotard / Streetfighter / Multistrada 1200 / Diavel / D16RR
Pictured raw but all product will be delivered in black anodized finish
Factory part weighs: .15lbs
Corse Dynamics part weighs: .05lbs
CORSE DYNAMICS Magnetic Oil Drain Plug
$18.95
Corse Dynamics oil drain plugs are a great way to upgrade your Ducati with a part that is both beautiful and functional!
- Our "double hex" design allows you to remove or install these plugs with either the factory tool OR an ordinary wrench or socket.
- Our plugs incorporate a Viton O-ring to ensure proper sealing against the engine. This provides a good seal every time
- Our plug comes pre-drilled for safety wire on all six faces. Our plugs include a rare earth magnet to collect any metal bits that might be inside your engine, our magnet is rated at six times the strength of other competing companies
CORSE DYNAMICS Front Axle Nut
$19.95
Corse Dynamics front axle nut for the following Ducati motorcycles:
748 / 916 / 996 / 998 / Monster / 749 / 999 / Hypermotard / Multistrada 620 / Multistrada 1000 / Multistrada 1100 / Supersport / Sport Classic
CORSE DYNAMICS Eccentric Foot Peg
$45.95
Don't let a tip over ruin your day, carry a spare.
Replacement eccentrically adjustable foot peg for Acculign,
Ducati Performance, FBF & MW rear sets in black or silver with
a 17mm diameter eccentric.
This peg has been designed to offer superior traction
while allowing great articulation for the rider!
Linear Mode
