Dainese builds a lot of high end suits/jackets/gloves ect. This particular jacket is a good technical jacket with a sport look at a reasonable price. The Cage jacket using homolgated protectors and comes with the pockets where you can install new back and thorax chest protectors inside. This jacket also comes with Dainese's 3D bubble Liner. This jacket has a little bit looser of a fit unlike most of their race jackets.
To help with sizing please watch the video, and this jacket also comes in 4 color waves; Black, Black/White, Black/Red, and Black/Blue.
This jacket has a video review that you can see below.
You can view all of the
Dainese Cage Leather Jackets on our website here.
If you have any questions or would like to order a cage leather jacket or any Dainese product give Jason a call at
888-784-4327 ext 210, or
e-mail Jason@sportbiketrackgear.com
The Cage jacket has a small amount of perforation on each of the arms.
Here you can see part of the 3D liner and the adjustable/removable composite protectors that are EN 1621.1/97 Standard. As well as an inner pocket in the left side of the jacket.
Here you can see the pocket for the optional chest armor.
The 3D liner is a nice feature and super comfortable against the skin. Located below is the pocket for the G1 or G2 back protector.
The waist is adjustable to fit all different size people, you can also get a glimpse of the reflective stripping on the back as well.
This jacket has 3 pockets on the outside of the jacket, in the upper left chest, and on each side of the ribs. This picture also shows how tidy the stitching is on even just a pocket.
Linear Mode
