Motowheels Streetfighter Project

[moto]

We received our Streetfighter a few days ago. We finally found some time to work on it.

We have a lot of product for the Strreetfighter in stock.
so we replaced what we thought would make the biggest difference first.

Here are the results after our first day:

BST CF 7 spoke "Street" Front Wheel: 848, 1098, 1198, Streetfighter, HM


BST CF 7 spoke "Street" Rear Wheel: 1098, 1198, Streetfighter

We also added a pair of RHINOMOTO Front Axle Slider: Ducati 1098/848 and a CF Front Fender "Diversion"


The OBERON Clutch Slave Cylinder 29mm will reduce the lever effort by about 30%. It has become our favorite because it is easir to find neutral than the 30mm slave cylinders , the finish and color selection is good. The price is 35% less than the others as well.

A SPEEDYMOTO "Leggero" Sprocket Cover replaces the original plastic sprocket.

We reversed the linkage so we could get "racer" shifting. We will add a reverse shift lever later.


The MW Folding Clutch Lever: 999/1098/S4RS/HM-Black allow us to adjust to a more comfortable position. The folding feature reduces the likely hood of breaking the lever which can leave you stranded far from home or end your track day.


The OBERON "Bar End" Turn Signals: Black/Pr and CRG Blindsight Mirror are our favorites for turn signals and mirrors. They are hardly noticable when on the bike--yet the mirrors provide a very good view of traffic behind you. The turn signals on the barends light up front and back and can be seen day or night.

[moto]

We installed a Termi slip-on system for now.

Quat D is making a very interesting modular system for the Streetfighter that will allow you to use the same cannisters in three different configurations: STD position, Higher position with new midpipe (where the top pipe will be mounted above the current top pipe) and a full system with one cannister on each side using all new pipe.

-M

[moto]

When we have some more time, we'd like to fit the SPEEDYMOTO Billet Clutch Case

[moto]

Carbon Belt covers off of a 1098 were installed (CF Belt Cover Set: 1098-1198 ). We had to make a new vent screen because the 1098/1198 version is much larger. We prefer this version because it eliminates the two "hot-wheels"pulley shaped indentions on the SF covers.

[moto]

We are making an Ohlins steering damper fit kit for the Streetfighter.





__________________

[moto]

We replaced the reservoir covers with Billet Reservoir Covers: SF, MTS

[TheDucnutOfBevelville]

Wow you guys have been busy. Top job..
We know who to call now!
Quat exhaust option sounds good!

[okfighter]

When do you guys plan on getting the OBERON Clutch Slave Cylinder (black) in stock? I don't see the option on the site so i'm guessing its out of stock Thanks.

btw, good work!

[petzi]

looks awesome ! the quad stuff sounds pretty interesting...

[zvez]

Magnificent, gosh I'd love a set of those BST wheels!!

Curious, I mount my own tires, any special tools or caveats mounting tires on these wheels??
Chris