Rear signals in vents - Ducati.ms

WhiteGorilla1098 · Dec 18th, 2011, 1:04 am

Happy Holidays all.

I have beens searching for info. I remember reading about it on here once before. Does anyone have any info on how I can do this. I have seen some led tube lights on the internet. Can these be used?

Thanks for the help
BG

**** · Dec 18th, 2011, 2:33 am

Randy sells them. He also gives forum discounts too:

BellissiMoto – Competition Werkes (Comp Werkes) Fender Eliminators

LaRossa · Dec 18th, 2011, 8:02 am

Here, knock yourself out!

Buy Now: Universal Mini LED Light Bars for Motorcycles | Pashnit Moto
Radiantz LED Lighting - Home Page
Dual Intensity LED Mini Light Bars - Chrome Glow

moto · Dec 18th, 2011, 5:25 pm

This is the Competition Werkes Fender Eliminator: LTD Streetfighter:

It relocates the plate under the seat and comes with little turnsignals that fit inside the vents.
They also make a plate relocator that is mounted under the brake light:
Competition Werkes Fender Eliminator: Streetfighter

The bar end turnsignals are: OBERON "Bar End" Turn Signals

Horseonly · Dec 19th, 2011, 5:09 am

Try these guys,

I used the Competition works bracket but used these LEDS Hyperlites Flashing led motorcycle brake lights, runing lights, and turn signals : the 16 row fits perfect also used epoxy resin as well at the double sided tape supplied to attach to the bracket. Ill post pics when I get home.

ltsnipe · Dec 19th, 2011, 8:45 pm

I did up these home-made signals with some help from LaRossa. I liked them for a while but ended up switching to an intergrated tail

Wonway · Dec 19th, 2011, 11:01 pm

Factory's in vents (hotglued and epoxied) with integrated tail light: http://12velectronics.net/images/mis...sftailight.wmv

zwampy · Dec 20th, 2011, 6:59 am

Quote:

Originally Posted by WhiteGorilla1098

Happy Holidays all.

I have beens searching for info. I remember reading about it on here once before. Does anyone have any info on how I can do this. I have seen some led tube lights on the internet. Can these be used?

Thanks for the help
BG

This is something I did...not as fancy as some of the other kits but it's free and reuses all the wiring and plugs and signals from stock setup. All you need is some double sided tape and a few beers:

Enjoy!

WhiteGorilla1098 · Dec 20th, 2011, 5:47 pm

Thank you very much guys. I like free. Think I might try stocks in the vents this weekend..

BG

Sent from my myTouch_4G_Slide using Motorcycle App

sphinct03 · Dec 20th, 2011, 7:35 pm

I did the same thing as ZWAMPY. 2 hours later my tail was clean and it only cost me 2.99 for the roll of heavy duty double sided tape. Its funny, anlge of the plastic backing on the signals fits perfectly into the angles of the plastic in the tail. Great mod and it looks factory. Good luck.